[PATCH v2 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups

From: Lee Jones
Date: Wed Feb 01 2017 - 09:32:29 EST


Having just defined some new Pinctrl groups for when HW flow-control
is {en,dis}abled, let's reference them for use within the driver.

Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/boot/dts/stih407-family.dtsi | 3 +--
arch/arm/boot/dts/stih410-b2260.dts | 5 ++++-
2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c8b2944..e480e32 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -222,9 +222,8 @@
compatible = "st,asc";
reg = <0x9830000 0x2c>;
interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial0>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ /* Pinctrl moved out to a per-board configuration */

status = "disabled";
};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index fa16aba..cbcbcb4 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -62,8 +62,11 @@
/* Low speed expansion connector */
uart0: serial@9830000 {
label = "LS-UART0";
- status = "okay";
+ pinctrl-names = "default", "no-hw-flowctrl";
+ pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
+ pinctrl-1 = <&pinctrl_serial0>;
rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
};

/* Low speed expansion connector */
--
2.9.3