[tip:x86/platform] x86/platform/UV: Initialize PCH GPP_D_0 NMI Pin to be NMI source

From: tip-bot for travis@xxxxxxx
Date: Wed Feb 01 2017 - 05:12:40 EST


Commit-ID: 56e17ca2c5ed31f5812ed8e0694e7ef880068cfd
Gitweb: http://git.kernel.org/tip/56e17ca2c5ed31f5812ed8e0694e7ef880068cfd
Author: travis@xxxxxxx <travis@xxxxxxx>
AuthorDate: Wed, 25 Jan 2017 10:35:22 -0600
Committer: Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Wed, 1 Feb 2017 10:21:00 +0100

x86/platform/UV: Initialize PCH GPP_D_0 NMI Pin to be NMI source

The initialize PCH NMI I/O function is separate and may be moved to BIOS
for security reasons. This function detects whether the PCH NMI config
has already been done and if not, it will then initialize the PCH here.

Signed-off-by: Mike Travis <travis@xxxxxxx>
Reviewed-by: Russ Anderson <rja@xxxxxxx>
Acked-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Acked-by: Dimitri Sivanich <sivanich@xxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Link: http://lkml.kernel.org/r/20170125163518.089387859@xxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
arch/x86/platform/uv/uv_nmi.c | 127 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)

diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index c10e00b..6a71b08 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -70,6 +70,7 @@ EXPORT_PER_CPU_SYMBOL_GPL(uv_cpu_nmi);
/* UV hubless values */
#define NMI_CONTROL_PORT 0x70
#define NMI_DUMMY_PORT 0x71
+#define PAD_OWN_GPP_D_0 0x2c
#define GPI_NMI_STS_GPP_D_0 0x164
#define GPI_NMI_ENA_GPP_D_0 0x174
#define STS_GPP_D_0_MASK 0x1
@@ -160,6 +161,9 @@ static bool uv_pch_intr_enable = true;
static bool uv_pch_intr_now_enabled;
module_param_named(pch_intr_enable, uv_pch_intr_enable, bool, 0644);

+static bool uv_pch_init_enable = true;
+module_param_named(pch_init_enable, uv_pch_init_enable, bool, 0644);
+
static int uv_nmi_debug;
module_param_named(debug, uv_nmi_debug, int, 0644);

@@ -307,6 +311,127 @@ static void uv_nmi_setup_hubless_intr(void)
uv_pch_intr_now_enabled ? "enabled" : "disabled");
}

+static struct init_nmi {
+ unsigned int offset;
+ unsigned int mask;
+ unsigned int data;
+} init_nmi[] = {
+ { /* HOSTSW_OWN_GPP_D_0 */
+ .offset = 0x84,
+ .mask = 0x1,
+ .data = 0x0, /* ACPI Mode */
+ },
+
+/* clear status */
+ { /* GPI_INT_STS_GPP_D_0 */
+ .offset = 0x104,
+ .mask = 0x0,
+ .data = 0x1, /* Clear Status */
+ },
+ { /* GPI_GPE_STS_GPP_D_0 */
+ .offset = 0x124,
+ .mask = 0x0,
+ .data = 0x1, /* Clear Status */
+ },
+ { /* GPI_SMI_STS_GPP_D_0 */
+ .offset = 0x144,
+ .mask = 0x0,
+ .data = 0x1, /* Clear Status */
+ },
+ { /* GPI_NMI_STS_GPP_D_0 */
+ .offset = 0x164,
+ .mask = 0x0,
+ .data = 0x1, /* Clear Status */
+ },
+
+/* disable interrupts */
+ { /* GPI_INT_EN_GPP_D_0 */
+ .offset = 0x114,
+ .mask = 0x1,
+ .data = 0x0, /* disable interrupt generation */
+ },
+ { /* GPI_GPE_EN_GPP_D_0 */
+ .offset = 0x134,
+ .mask = 0x1,
+ .data = 0x0, /* disable interrupt generation */
+ },
+ { /* GPI_SMI_EN_GPP_D_0 */
+ .offset = 0x154,
+ .mask = 0x1,
+ .data = 0x0, /* disable interrupt generation */
+ },
+ { /* GPI_NMI_EN_GPP_D_0 */
+ .offset = 0x174,
+ .mask = 0x1,
+ .data = 0x0, /* disable interrupt generation */
+ },
+
+/* setup GPP_D_0 Pad Config */
+ { /* PAD_CFG_DW0_GPP_D_0 */
+ .offset = 0x4c0,
+ .mask = 0xffffffff,
+ .data = 0x82020100,
+/*
+ * 31:30 Pad Reset Config (PADRSTCFG): = 2h # PLTRST# (default)
+ *
+ * 29 RX Pad State Select (RXPADSTSEL): = 0 # Raw RX pad state directly
+ * from RX buffer (default)
+ *
+ * 28 RX Raw Override to '1' (RXRAW1): = 0 # No Override
+ *
+ * 26:25 RX Level/Edge Configuration (RXEVCFG):
+ * = 0h # Level
+ * = 1h # Edge
+ *
+ * 23 RX Invert (RXINV): = 0 # No Inversion (signal active high)
+ *
+ * 20 GPIO Input Route IOxAPIC (GPIROUTIOXAPIC):
+ * = 0 # Routing does not cause peripheral IRQ...
+ * # (we want an NMI not an IRQ)
+ *
+ * 19 GPIO Input Route SCI (GPIROUTSCI): = 0 # Routing does not cause SCI.
+ * 18 GPIO Input Route SMI (GPIROUTSMI): = 0 # Routing does not cause SMI.
+ * 17 GPIO Input Route NMI (GPIROUTNMI): = 1 # Routing can cause NMI.
+ *
+ * 11:10 Pad Mode (PMODE1/0): = 0h = GPIO control the Pad.
+ * 9 GPIO RX Disable (GPIORXDIS):
+ * = 0 # Enable the input buffer (active low enable)
+ *
+ * 8 GPIO TX Disable (GPIOTXDIS):
+ * = 1 # Disable the output buffer; i.e. Hi-Z
+ *
+ * 1 GPIO RX State (GPIORXSTATE): This is the current internal RX pad state..
+ * 0 GPIO TX State (GPIOTXSTATE):
+ * = 0 # (Leave at default)
+ */
+ },
+
+/* Pad Config DW1 */
+ { /* PAD_CFG_DW1_GPP_D_0 */
+ .offset = 0x4c4,
+ .mask = 0x3c00,
+ .data = 0, /* Termination = none (default) */
+ },
+};
+
+static void uv_init_hubless_pch_d0(void)
+{
+ int i, read;
+
+ read = *PCH_PCR_GPIO_ADDRESS(PAD_OWN_GPP_D_0);
+ if (read != 0) {
+ pr_info("UV: Hubless NMI already configured\n");
+ return;
+ }
+
+ nmi_debug("UV: Initializing UV Hubless NMI on PCH\n");
+ for (i = 0; i < ARRAY_SIZE(init_nmi); i++) {
+ uv_init_hubless_pch_io(init_nmi[i].offset,
+ init_nmi[i].mask,
+ init_nmi[i].data);
+ }
+}
+
static int uv_nmi_test_hubless(struct uv_hub_nmi_s *hub_nmi)
{
int *pstat = PCH_PCR_GPIO_ADDRESS(GPI_NMI_STS_GPP_D_0);
@@ -929,6 +1054,8 @@ void __init uv_nmi_setup_hubless(void)
pch_base = xlate_dev_mem_ptr(PCH_PCR_GPIO_1_BASE);
nmi_debug("UV: PCH base:%p from 0x%lx, GPP_D_0\n",
pch_base, PCH_PCR_GPIO_1_BASE);
+ if (uv_pch_init_enable)
+ uv_init_hubless_pch_d0();
uv_init_hubless_pch_io(GPI_NMI_ENA_GPP_D_0,
STS_GPP_D_0_MASK, STS_GPP_D_0_MASK);
uv_nmi_setup_hubless_intr();