[PATCH 4.9 040/130] PCI: designware: Check for iATU unroll only on platforms that use ATU

From: Greg Kroah-Hartman
Date: Tue Jan 24 2017 - 03:00:28 EST


4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Murali Karicheri <m-karicheri2@xxxxxx>

commit a782b5f986c3fa1cfa7f2b57941200c6a5809242 upstream.

Previously we checked for iATU unroll support by reading PCIE_ATU_VIEWPORT
even on platforms, e.g., Keystone, that do not have ATU ports. This can
cause bad behavior such as asynchronous external aborts:

OF: PCI: MEM 0x60000000..0x6fffffff -> 0x60000000
Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
pgd = c0003000
[00000000] *pgd=80000800004003, *pmd=00000000
Internal error: : 1211 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-00009-g6ff59d2-dirty #7
Hardware name: Keystone
task: eb878000 task.stack: eb866000
PC is at dw_pcie_setup_rc+0x24/0x380
LR is at ks_pcie_host_init+0x10/0x170

Move the dw_pcie_iatu_unroll_enabled() check so we only call it on
platforms that do not use the ATU. These platforms supply their own
->rd_other_conf() and ->wr_other_conf() methods.

[bhelgaas: changelog]
Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature")
Fixes: 416379f9ebde ("PCI: designware: Check for iATU unroll support after initializing host")
Tested-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Acked-By: Joao Pinto <jpinto@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/pci/host/pcie-designware.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -807,11 +807,6 @@ void dw_pcie_setup_rc(struct pcie_port *
{
u32 val;

- /* get iATU unroll support */
- pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
- dev_dbg(pp->dev, "iATU unroll: %s\n",
- pp->iatu_unroll_enabled ? "enabled" : "disabled");
-
/* set the number of lanes */
val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL);
val &= ~PORT_LINK_MODE_MASK;
@@ -882,6 +877,11 @@ void dw_pcie_setup_rc(struct pcie_port *
* we should not program the ATU here.
*/
if (!pp->ops->rd_other_conf) {
+ /* get iATU unroll support */
+ pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
+ dev_dbg(pp->dev, "iATU unroll: %s\n",
+ pp->iatu_unroll_enabled ? "enabled" : "disabled");
+
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
PCIE_ATU_TYPE_MEM, pp->mem_base,
pp->mem_bus_addr, pp->mem_size);