Re: [PATCH] x86/mce: Keep quiet in case of broadcasted mce after system panic
From: Xunlei Pang
Date: Mon Jan 23 2017 - 20:26:19 EST
On 01/23/2017 at 10:50 PM, Borislav Petkov wrote:
> On Mon, Jan 23, 2017 at 09:35:53PM +0800, Xunlei Pang wrote:
>> One possible timing sequence would be:
>> 1st kernel running on multiple cpus panicked
>> then the crash dump code starts
>> the crash dump code stops the others cpus except the crashing one
>> 2nd kernel boots up on the crash cpu with "nr_cpus=1"
>> some broadcasted mce comes on some cpu amongst the other cpus(not the crashing cpu)
> Where does this broadcasted MCE come from?
>
> The crash dump code triggered it? Or it happened before the panic()?
>
> Are you talking about an *actual* sequence which you're experiencing on
> real hw or is this something hypothetical?
>
It occurred on real hardware when testing crash dump.
1) SysRq-c was injected for the test in 1st kernel
[ 49.897279] SysRq : Trigger a crash 2) The 2nd kernel started for kdump
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-229.el7.x86_64 root=UUID=976a15c8-8cbe-44ad-bb91-23f9b18e8789 ro console=ttyS1,115200 nmi_watchdog=0 irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 rootflags=nofail acpi_no_memhotplug disable_cpu_apicid=0 elfcorehdr=869772K 3) An MCE came to the 1st kernel, timeout panic occurred, and rebooted the machine
[ 6.095706] Dazed and confused, but trying to continue // message of the 1st kernel
[ 81.655507] Kernel panic - not syncing: Timeout synchronizing machine check over CPUs
[ 82.729324] Shutting down cpus with NMI
[ 82.774539] drm_kms_helper: panic occurred, switching back to text console
[ 82.782257] Rebooting in 10 seconds..
Please see the attached for the full log. Regards, Xunlei
[ 49.897279] SysRq : Trigger a crash
[ 49.901218] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 49.909988] IP: [<ffffffff81397486>] sysrq_handle_crash+0x16/0x20
[ 49.916805] PGD 868add067 PUD 867139067 PMD 0
[ 49.921805] Oops: 0002 [#1] SMP
[ 49.925432] Modules linked in: ipmi_devintf intel_powerclamp coretemp intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt sb_edac iTCO_vendor_support ntb mei_me pcspkr edac_core ioatdma lpc_ich i2c_i801 ipmi_si mei mfd_core shpchp dca ipmi_msghandler acpi_pad acpi_power_meter xfs sd_mod sr_mod crc_t10dif cdrom crct10dif_common usb_storage mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ata_generic ttm bnx2x pata_acpi mdio drm ata_piix ptp libata i2c_core pps_core libcrc32c
[ 49.984994] CPU: 9 PID: 9463 Comm: do-test.sh Not tainted 3.10.0-229.el7.x86_64 #1
[ 49.993456] Hardware name: NEC Express5800/B120d-h [N8400-126Y]/G7LDV, BIOS 4.6.2013 10/24/2012
[ 50.003164] task: ffff880433700000 ti: ffff8808653b8000 task.ti: ffff8808653b8000
[ 50.011514] RIP: 0010:[<ffffffff81397486>] [<ffffffff81397486>] sysrq_handle_crash+0x16/0x20
[ 50.021045] RSP: 0018:ffff8808653bbe80 EFLAGS: 00010046
[ 50.026976] RAX: 000000000000000f RBX: ffffffff819c18a0 RCX: 0000000000000000
[ 50.034939] RDX: 0000000000000000 RSI: ffff88087fc2d488 RDI: 0000000000000063
[ 50.042908] RBP: ffff8808653bbe80 R08: 0000000000000092 R09: 0000000000000608
[ 50.050870] R10: 0000000000000607 R11: 0000000000000003 R12: 0000000000000063
[ 50.058837] R13: 0000000000000246 R14: 0000000000000007 R15: 0000000000000000
[ 50.066799] FS: 00007f0faaf54740(0000) GS:ffff88087fc20000(0000) knlGS:0000000000000000
[ 50.075828] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 50.082244] CR2: 0000000000000000 CR3: 0000000866d07000 CR4: 00000000000407e0
[ 50.090212] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 50.098173] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 50.106133] Stack:
[ 50.108388] ffff8808653bbeb8 ffffffff81397c32 0000000000000002 00007f0faaf58000
[ 50.116671] ffff8808653bbf48 0000000000000002 0000000000000000 ffff8808653bbed0
[ 50.124963] ffffffff8139810f ffff8804674a6540 ffff8808653bbef0 ffffffff8122de0d
[ 50.133257] Call Trace:
[ 50.135993] [<ffffffff81397c32>] __handle_sysrq+0xa2/0x170
[ 50.142219] [<ffffffff8139810f>] write_sysrq_trigger+0x2f/0x40
[ 50.148841] [<ffffffff8122de0d>] pro c_reg_write+0x3] Code: eb 9b 45 01 f4 45 39 65 34 75 e5 4c 89 ef e8 e2 f7 ff ff eb db 66 66 66 66 90 55 c7 05 50 d7 59 00 01 00 00 00 48 89 e5 0f ae f8 <c6> 04 25 00 00 00 00 01 5d c3 66 66 66 66 90 55 31 c0 c7 05 ce
[ 50.194758] RIP [<ffffffff81397486>] sysrq_handle_crash+0x16/0x20
[ 50.201669] RSP <ffff8808653bbe80>
[ 50.205558] CR2: 0000000000000000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-229.el7.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-7) (GCC) ) #1 SMP Thu Jan 29 18:37:38 EST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-229.el7.x86_64 root=UUID=976a15c8-8cbe-44ad-bb91-23f9b18e8789 ro console=ttyS1,115200 nmi_watchdog=0 irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 rootflags=nofail acpi_no_memhotplug disable_cpu_apicid=0 elfcorehdr=869772K
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000099fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009a000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000002b000000-0x0000000035162fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007cf6d000-0x000000007d08cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007d08d000-0x000000007d109fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007d10a000-0x000000007de92fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007de93000-0x000000007de9bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007de9c000-0x000000007df3efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007df3f000-0x000000007e393fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007e394000-0x000000007ed9bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ed9c000-0x000000007f7a7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f7a8000-0x000000007f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x35163 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] x2apic enabled by BIOS, switching to x2apic ops
[ 0.000000] found SMP MP-table at [mem 0x000fce70-0x000fce7f] mapped at [ffff8800000fce70]
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x34e00000-0x34ffffff]
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x34dfffff]
[ 0.000000] init_memory_mapping: [mem 0x2b000000-0x33ffffff]
[ 0.000000] init_memory_mapping: [mem 0x35000000-0x35162fff]
[ 0.000000] RAMDISK: [mem 0x31f7a000-0x32ffffff]
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 NEC )
[ 0.000000] ACPI: XSDT 000000007d08d080 00084 (v01 NEC SVWSPD21 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000007d098570 000F4 (v04 NEC SVWSPD21 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 000000007d08d198 0B3D3 (v02 NEC SVWSPD21 00000015 INTL 20091112)
[ 0.000000] ACPI: FACS 000000007f7a5f80 00040
[ 0.000000] ACPI: APIC 000000007d098668 00224 (v03 NEC SVWSPD21 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000007d098890 0003C (v01 NEC SVWSPD21 01072009 MSFT 00000097)
[ 0.000000] ACPI: SRAT 000000007d0988d0 004B0 (v01 NEC SVWSPD21 00000001 AMI. 00000000)
[ 0.000000] ACPI: SLIT 000000007d098d80 00030 (v01 NEC SVWSPD21 00000000 AMI. 00000000)
[ 0.000000] ACPI: HPET 000000007d098db0 00038 (v01 NEC SVWSPD21 01072009 AMI. 00000005)
[ 0.000000] ACPI: PRAD 000000007d098de8 000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 000000007d098ea8 70104 (v02 NEC SVWSPD21 00004000 INTL 20090903)
[ 0.000000] ACPI: SLIC 000000007d108fb0 00176 (v01 NEC SVWSPD21 00000000 CAS 00000001)
[ 0.000000] ACPI: SPCR 000000007d109128 00050 (v01 NEC SVWSPD21 01072009 AMI. 00000005)
[ 0.000000] ACPI: DMAR 000000007d109178 00138 (v01 NEC SVWSPD21 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 000000007d1092b0 00030 (v01 NEC SVWSPD21 00000000 00000000)
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000035162fff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x35162fff]
[ 0.000000] NODE_DATA [mem 0x3513c000-0x35162fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00099fff]
[ 0.000000] node 0: [mem 0x2b000000-0x35162fff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: Disabling requested cpu. Processor 0/0x0 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 1/0x2 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 2/0x4 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 3/0x6 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 4/0x8 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 5/0xa ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 6/0xc ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 7/0xe ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 8/0x20 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 10/0x24 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 11/0x26 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x28] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 12/0x28 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x2a] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 13/0x2a ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2c] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 14/0x2c ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2e] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 15/0x2e ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 16/0x1 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 17/0x3 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 18/0x5 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 19/0x7 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 20/0x9 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 21/0xb ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 22/0xd ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 23/0xf ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 24/0x21 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 25/0x23 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 26/0x25 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 27/0x27 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x29] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 28/0x29 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x2b] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 29/0x2b ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2d] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 30/0x2d ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2f] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 31/0x2f ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: 32 Processors exceeds NR_CPUS limit of 1
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00100000-0x2affffff]
[ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880034e00000 s82752 r8192 d23744 u2097152
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 40798
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-229.el7.x86_64 root=UUID=976a15c8-8cbe-44ad-bb91-23f9b18e8789 ro console=ttyS1,115200 nmi_watchdog=0 irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 rootflags=nofail acpi_no_memhotplug disable_cpu_apicid=0 elfcorehdr=869772K
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] Disabling memory control group subsystem
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 126944k/869772k available (6241k kernel code, 703900k absent, 38928k reserved, 4181k data, 1604k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=1.
[ 0.000000] Experimental no-CBs for all CPUs
[ 0.000000] Experimental no-CBs CPUs: 0.
[ 0.000000] NR_IRQS:327936 nr_irqs:256 16
[ 0.000000] Spurious LAPIC timer interrupt on cpu 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS1] enabled
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2000.018 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.03 BogoMIPS (lpj=2000018)
[ 0.011888] pid_max: default: 32768 minimum: 301
[ 0.017077] Security Framework initialized
[ 0.021662] SELinux: Initializing.
[ 0.025640] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.033499] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.041197] Mount-cache hash table entries: 4096
[ 0.046576] Initializing cgroup subsys memory
[ 0.051455] Initializing cgroup subsys devices
[ 0.056422] Initializing cgroup subsys freezer
[ 0.061390] Initializing cgroup subsys net_cls
[ 0.066364] Initializing cgroup subsys blkio
[ 0.071145] Initializing cgroup subsys perf_event
[ 0.076404] Initializing cgroup subsys hugetlb
[ 0.081408] CPU: Physical Processor ID: 1
[ 0.085890] CPU: Processor Core ID: 1
[ 0.089991] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.089991] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.104561] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.104561] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.104561] tlb_flushall_shift: 6
[ 0.126986] Freeing SMP alternatives: 24k freed
[ 0.133595] ACPI: Core revision 20130517
[ 0.154363] ACPI: All ACPI Tables successfully acquired
[ 0.160257] ftrace: allocating 23909 entries in 94 pages
[ 0.179567] dmar: Host address width 46
[ 0.183858] dmar: DRHD base: 0x000000fbffe000 flags: 0x0
[ 0.189795] dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
[ 0.198842] dmar: DRHD base: 0x000000dfffc000 flags: 0x1
[ 0.204782] dmar: IOMMU 1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
[ 0.213823] dmar: RMRR base: 0x0000007dea3000 end: 0x0000007dedafff
[ 0.220834] dmar: ATSR flags: 0x0
[ 0.838008] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.843617] pci 0000:00:03.0: PCI bridge to [bus 20-3c]
[ 0.849517] pci 0000:00:11.0: PCI bridge to [bus 50-5f]
[ 0.855410] pci 0000:00:1c.0: PCI bridge to [bus 60-61]
[ 0.863257] pci 0000:00:1c.7: PCI bridge to [bus 62-67]
[ 0.869171] pci 0000:00:1e.0: PCI bridge to [bus 6a] (subtractive decode)
[ 0.876828] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.885139] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
[ 0.891750] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.900880] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.908299] PCI host bridge to bus 0000:7f
[ 0.912871] pci_bus 0000:7f: root bus resource [bus 7f]
[ 0.920945] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
[ 0.927846] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.937106] acpi PNP0A08:01: _OSC: platform does not support [AER]
[ 0.944123] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.952860] PCI host bridge to bus 0000:80
[ 0.957433] pci_bus 0000:80: root bus resource [bus 80-fe]
[ 0.963555] pci_bus 0000:80: root bus resource [io 0xa000-0xffff]
[ 0.970451] pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff]
[ 0.979463] pci 0000:80:00.0: PCI bridge to [bus 81-8f]
[ 0.985306] acpi PNP0A08:01: Disabling ASPM (FADT indicates it is unsupported)
[ 0.993424] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
[ 1.000033] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.009155] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.016580] PCI host bridge to bus 0000:ff
[ 1.021153] pci_bus 0000:ff: root bus resource [bus ff]
[ 1.029013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15), disabled.
[ 1.037527] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 12 14 15), disabled.
[ 1.046043] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 12 14 15), disabled.
[ 1.054354] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 12 14 15), disabled.
[ 1.062659] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 12 14 15) *0, disabled.
[ 1.071462] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 12 14 15) *0, disabled.
[ 1.080266] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 12 14 15), disabled.
[ 1.088873] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 12 14 15), disabled.
[ 1.098586] acpi LNXCPU:12: BIOS reported wrong ACPI id 0 for the processor
[ 1.107217] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 1.112688] vgaarb: device added: PCI:0000:62:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.121727] vgaarb: loaded
[ 1.124745] vgaarb: bridge control possible 0000:62:00.0
[ 1.130752] SCSI subsystem initialized
[ 1.134961] ACPI: bus type USB registered
[ 1.139448] usbcore: registered new interface driver usbfs
[ 1.145585] usbcore: registered new interface driver hub
[ 1.151536] usbcore: registered new device driver usb
[ 1.157261] PCI: Using ACPI for IRQ routing
[ 1.166361] NetLabel: Initializing
[ 1.170164] NetLabel: domain hash size = 128
[ 1.175024] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.180585] NetLabel: unlabeled traffic allowed by default
[ 1.186864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.193861] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.202396] Switching to clocksource hpet
[ 1.211432] pnp: PnP ACPI init
[ 1.214855] ACPI: bus type PNP registered
[ 1.219416] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.226803] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.234190] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
[ 1.241580] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 1.248970] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
[ 1.256743] system 00:00: [mew full-speed USB device number 3 using ehci-pci
[ 4.642333] b53269] bnx2x 0000:02:00.2: part number 394D4342-31383735-30315430-473030
[ 4.754097] usb 2-1.1: New USB device found, idVendor=046b, idProduct=ff10
[ 4.761776] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.769944] usb 2-1.1: Product: Virtual Keyboard and Mouse
[ 4.776078] usb 2-1.1: Manufacturer: American Megatrends Inc.
[ 4.784918] bnx2x 0000:02:00.3: msix capability found
[ 4.794890] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
[ 4.810287] bnx2x 0000:02:00.3: part number 394D4342-31383735-30315430-473030
[ 4.832949] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.1/input0
[ 4.868726] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
[ 4.897947] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.1/input1
[ 4.915125] bnx2x 0000:02:00.4: msix capability found
[ 4.925275] bnx2x 0000:02:00.4: part number 394D4342-31383735-30315430-473030
[ 5.020362] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[ 5.028219] bnx2x 0000:02:00.5: msix capability found
[ 5.038287] bnx2x 0000:02:00.5: part number 394D4342-31383735-30315430-473030
[ 5.135374] b0.6: msix capability found
[ 5.146276] b[ 5.191222] usb 2-1.3: New USB device found, idVendor=046b, idProduct=ff92
[ 5.198902] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 5.207062] usb 2-1.3: Product: Composite Device
[ 5.212220] usb 2-1.3: Manufacturer: American Megatrends Inc.
[ 5.218638] usb 2-1.3: SerialNumber: AAAABBBBCCCC4
[ 5.279368] bnx2x 0000:02:00.7: msix capability found
[ 5.292279] bnx2x 0000:02:00.7: part number 394D4342-31383735-30315430-473030
[ 5.430381] bnx2x 0000:01:00.0: msix capability found
[ 5.441297] bnx2x 0000:01:00.0: part number 394D4342-31383735-30315430-473030
[ 5.504653] bnx2x 0000:01:00.1: msix capability found
[ 5.515280] bnx2x 0000:01:00.1: part number 394D4342-31383735-30315430-473030
[ 6.082783] Upower saving mode enabled?
[ 6.095706] Dazed and confused, but trying to continue
[ 81.655507] Kernel panic - not syncing: Timeout synchronizing machine check over CPUs
[ 82.729324] Shutting down cpus with NMI
[ 82.774539] drm_kms_helper: panic occurred, switching back to text console
[ 82.782257] Rebooting in 10 seconds..
[ 92.787401] ACPI MEMORY or I/O RESET_REG.
[ 95.233944] ACPI MEMORY or I/O RESET_REG.