Re: [PATCH 8/9] dt-bindings: Add Multi-Inno MI0283QT binding

From: Rob Herring
Date: Mon Jan 23 2017 - 15:43:49 EST


On Sun, Jan 22, 2017 at 07:11:16PM +0100, Noralf Trønnes wrote:
> Add device-tree binding documentation for the MI0283QT display panel.
>
> Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
> ---
>
> Datasheet: https://cdn-shop.adafruit.com/datasheets/MI0283QT-11+V1.1.PDF
>
>
> .../bindings/display/multi-inno,mi0283qt.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
>
> diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
> new file mode 100644
> index 0000000..eed48c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
> @@ -0,0 +1,27 @@
> +Multi-Inno MI0283QT display panel
> +
> +Required properties:
> +- compatible: "multi-inno,mi0283qt".
> +
> +The node for this driver must be a child node of a SPI controller, hence
> +all mandatory properties described in ../spi/spi-bus.txt must be specified.
> +
> +Optional properties:
> +- dc-gpios: D/C pin. The presence/absence of this GPIO determines
> + the panel interface mode (IM[3:0] pins):
> + - present: IM=x110 4-wire 8-bit data serial interface
> + - absent: IM=x101 3-wire 9-bit data serial interface
> +- reset-gpios: Reset pin
> +- power-supply: A regulator node for the supply voltage.
> +- backlight: phandle of the backlight device attached to the panel
> +- rotation: panel rotation in degrees counter clockwise (0,90,180,270)

This isn't a standard property, but probably should be. Please document
in a common spot.

> +
> +Example:
> + mi0283qt@0{
> + compatible = "multi-inno,mi0283qt";
> + reg = <0>;
> + spi-max-frequency = <32000000>;
> + rotation = <90>;
> + dc-gpios = <&gpio 25 0>;
> + backlight = <&backlight>;
> + };
> --
> 2.10.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html