[PATCH v3 1/4] mpt3sas: Added print to notify cable running at a degraded speed.

[Chaitra P B]

Driver processes the event MPI26_EVENT_ACTIVE_CABLE_DEGRADED
when a cable is present and is running at a degraded speed
(below the SAS3 12 Gb/s rate). Prints added
to inform the user that the cable is not running at
optimal speed.

Signed-off-by: Chaitra P B <chaitra.basappa@xxxxxxxxxxxx>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpi/mpi2_ioc.h  |    2 ++
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |   25 +++++++++++++++++--------
 2 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 8bae305..af4be40 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -624,6 +624,8 @@ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
 
 /* defines for ReasonCode field */
 #define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER     (0x00)
+#define MPI26_EVENT_ACTIVE_CABLE_PRESENT                (0x01)
+#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED               (0x02)
 
 /*Hard Reset Received Event data */
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 75f3fce..2c6a689 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -8028,15 +8028,24 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 	case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
 		ActiveCableEventData =
 		    (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
-		if (ActiveCableEventData->ReasonCode ==
-				MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) {
-			pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d",
-			    ioc->name, ActiveCableEventData->ReceptacleID);
-			pr_info("cannot be powered and devices connected to this active cable");
-			pr_info("will not be seen. This active cable");
-			pr_info("requires %d mW of power",
-			    ActiveCableEventData->ActiveCablePowerRequirement);
+		switch (ActiveCableEventData->ReasonCode) {
+		case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
+			pr_notice(MPT3SAS_FMT "Receptacle ID %d: This active cable"
+				  " requires %d mW of power\n", ioc->name,
+			     ActiveCableEventData->ReceptacleID,
+			     ActiveCableEventData->ActiveCablePowerRequirement);
+			pr_notice(MPT3SAS_FMT "Receptacle ID %d: Devices connected"
+				  " to this active cable will not be seen\n",
+			     ioc->name, ActiveCableEventData->ReceptacleID);
+			break;
+
+		case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
+			pr_notice(MPT3SAS_FMT "ReceptacleID %d: This cable",
+				ioc->name, ActiveCableEventData->ReceptacleID);
+			pr_notice(" is not running at an optimal speed(12 Gb/s)\n");
+			break;
 		}
+
 		break;
 
 	default: /* ignore the rest */
-- 
1.7.1