Re: [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock

From: Rob Herring
Date: Sat Jan 21 2017 - 15:20:15 EST


On Wed, Jan 18, 2017 at 02:08:27PM +0800, Chunfeng Yun wrote:
> add a reference clock for compatibility

Why? This block suddenly has 2 clocks instead of 1?

>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/usb/mt8173-mtu3.txt | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> index e049d19..8c976cd 100644
> --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> +++ b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> @@ -10,7 +10,7 @@ Required properties:
> - vusb33-supply : regulator of USB avdd3.3v
> - clocks : a list of phandle + clock-specifier pairs, one for each
> entry in clock-names
> - - clock-names : must contain "sys_ck" for clock of controller;
> + - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
> "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
> depends on "mediatek,enable-wakeup"
> - phys : a list of phandle + phy specifier pairs
> @@ -56,10 +56,10 @@ ssusb: usb@11271000 {
> phys = <&phy_port0 PHY_TYPE_USB3>,
> <&phy_port1 PHY_TYPE_USB2>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> - clocks = <&topckgen CLK_TOP_USB30_SEL>,
> + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
> <&pericfg CLK_PERI_USB0>,
> <&pericfg CLK_PERI_USB1>;
> - clock-names = "sys_ck",
> + clock-names = "sys_ck", "ref_ck",
> "wakeup_deb_p0",
> "wakeup_deb_p1";
> vusb33-supply = <&mt6397_vusb_reg>;
> @@ -79,8 +79,8 @@ ssusb: usb@11271000 {
> reg-names = "mac";
> interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> - clocks = <&topckgen CLK_TOP_USB30_SEL>;
> - clock-names = "sys_ck";
> + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
> + clock-names = "sys_ck", "ref_ck";
> vusb33-supply = <&mt6397_vusb_reg>;
> status = "disabled";
> };
> --
> 1.7.9.5
>