Re: [PATCH] usb: dwc3: core: Disable USB2.0 phy suspend when dwc3 acts as host role

From: Baolin Wang
Date: Thu Jan 19 2017 - 00:38:18 EST


Hi John,

On 19 January 2017 at 11:31, John Youn <John.Youn@xxxxxxxxxxxx> wrote:
> On 1/18/2017 7:12 PM, Baolin Wang wrote:
>> Hi John,
>>
>> On 19 January 2017 at 09:33, John Youn <John.Youn@xxxxxxxxxxxx> wrote:
>>> On 1/16/2017 2:38 AM, Felipe Balbi wrote:
>>>>
>>>> Hi,
>>>>
>>>> John Youn <John.Youn@xxxxxxxxxxxx> writes:
>>>>>> Baolin Wang <baolin.wang@xxxxxxxxxx> writes:
>>>>>>>> Baolin Wang <baolin.wang@xxxxxxxxxx> writes:
>>>>>>>>> When dwc3 controller acts as host role with attaching slow speed device
>>>>>>>>> (like mouse or keypad). Then if we plugged out the slow speed device,
>>>>>>>>> it will timeout to run the deconfiguration endpoint command to drop the
>>>>>>>>> endpoint's resources. Some xHCI command timeout log as below when
>>>>>>>>> disconnecting one slow device:
>>>>>>>>>
>>>>>>>>> [ 99.807739] c0 xhci-hcd.0.auto: Port Status Change Event for port 1
>>>>>>>>> [ 99.814699] c0 xhci-hcd.0.auto: resume root hub
>>>>>>>>> [ 99.819992] c0 xhci-hcd.0.auto: handle_port_status: starting port
>>>>>>>>> polling.
>>>>>>>>> [ 99.827808] c0 xhci-hcd.0.auto: get port status, actual port 0 status
>>>>>>>>> = 0x202a0
>>>>>>>>> [ 99.835903] c0 xhci-hcd.0.auto: Get port status returned 0x10100
>>>>>>>>> [ 99.850052] c0 xhci-hcd.0.auto: clear port connect change, actual
>>>>>>>>> port 0 status = 0x2a0
>>>>>>>>> [ 99.859313] c0 xhci-hcd.0.auto: Cancel URB ffffffc01ed6cd00, dev 1,
>>>>>>>>> ep 0x81, starting at offset 0xc406d210
>>>>>>>>> [ 99.869645] c0 xhci-hcd.0.auto: // Ding dong!
>>>>>>>>> [ 99.874776] c0 xhci-hcd.0.auto: Stopped on Transfer TRB
>>>>>>>>> [ 99.880713] c0 xhci-hcd.0.auto: Removing canceled TD starting at
>>>>>>>>> 0xc406d210 (dma).
>>>>>>>>> [ 99.889012] c0 xhci-hcd.0.auto: Finding endpoint context
>>>>>>>>> [ 99.895069] c0 xhci-hcd.0.auto: Cycle state = 0x1
>>>>>>>>> [ 99.900519] c0 xhci-hcd.0.auto: New dequeue segment =
>>>>>>>>> ffffffc1112f0880 (virtual)
>>>>>>>>> [ 99.908655] c0 xhci-hcd.0.auto: New dequeue pointer = 0xc406d220 (DMA)
>>>>>>>>> [ 99.915927] c0 xhci-hcd.0.auto: Set TR Deq Ptr cmd, new deq seg =
>>>>>>>>> ffffffc1112f0880 (0xc406d000 dma),
>>>>>>>>> new deq ptr = ffffff8002175220
>>>>>>>>> (0xc406d220 dma), new cycle = 1
>>>>>>>>> [ 99.931242] c0 xhci-hcd.0.auto: // Ding dong!
>>>>>>>>> [ 99.936360] c0 xhci-hcd.0.auto: Successful Set TR Deq Ptr cmd,
>>>>>>>>> deq = @c406d220
>>>>>>>>> [ 99.944458] c0 xhci-hcd.0.auto: xhci_hub_status_data: stopping port
>>>>>>>>> polling.
>>>>>>>>> [ 100.047619] c0 xhci-hcd.0.auto: xhci_drop_endpoint called for udev
>>>>>>>>> ffffffc01ae08800
>>>>>>>>> [ 100.057002] c0 xhci-hcd.0.auto: drop ep 0x81, slot id 1, new drop
>>>>>>>>> flags = 0x8, new add flags = 0x0
>>>>>>>>> [ 100.067878] c0 xhci-hcd.0.auto: xhci_check_bandwidth called for udev
>>>>>>>>> ffffffc01ae08800
>>>>>>>>> [ 100.076868] c0 xhci-hcd.0.auto: New Input Control Context:
>>>>>>>>>
>>>>>>>>> ......
>>>>>>>>>
>>>>>>>>> [ 100.427252] c0 xhci-hcd.0.auto: // Ding dong!
>>>>>>>>> [ 105.430728] c0 xhci-hcd.0.auto: Command timeout
>>>>>>>>> [ 105.436029] c0 xhci-hcd.0.auto: Abort command ring
>>>>>>>>> [ 113.558223] c0 xhci-hcd.0.auto: Command completion event does not match
>>>>>>>>> command
>>>>>>>>> [ 113.569778] c0 xhci-hcd.0.auto: Timeout while waiting for configure
>>>>>>>>> endpoint command
>>>>>>>>>
>>>>>>>>> The reason is it will suspend USB phy to disable phy clock when
>>>>>>>>> disconnecting the slow USB decice, that will hang on the xHCI commands
>>>>>>>>> executing which depends on the phy clock.
>>>>>>>>>
>>>>>>>>> Thus we should disable USB2.0 phy suspend feature when dwc3 acts as host
>>>>>>>>> role.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
>>>>>>>>> ---
>>>>>>>>> drivers/usb/dwc3/core.c | 14 ++++++++++++++
>>>>>>>>> 1 file changed, 14 insertions(+)
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>>>>>>>> index 9a4a5e4..0b646cf 100644
>>>>>>>>> --- a/drivers/usb/dwc3/core.c
>>>>>>>>> +++ b/drivers/usb/dwc3/core.c
>>>>>>>>> @@ -565,6 +565,20 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>>>>>>>>> if (dwc->revision > DWC3_REVISION_194A)
>>>>>>>>> reg |= DWC3_GUSB2PHYCFG_SUSPHY;
>>>>>>>>>
>>>>>>>>> + /*
>>>>>>>>> + * When dwc3 controller acts as host role with attaching one slow speed
>>>>>>>>> + * device (like mouse or keypad). Then if we plugged out the slow speed
>>>>>>>>> + * device, it will timeout to run the deconfiguration endpoint command.
>>>>>>>>> + * The reason is it will suspend USB phy to disable phy clock when
>>>>>>>>> + * disconnecting slow speed decice, which will affect the xHCI commands
>>>>>>>>> + * executing.
>>>>>>>>> + *
>>>>>>>>> + * Thus we should disable USB 2.0 phy suspend feature when dwc3 acts as
>>>>>>>>> + * host role.
>>>>>>>>> + */
>>>>>>>>> + if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->dr_mode == USB_DR_MODE_OTG)
>>>>>>>>> + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>>>>>>>>
>>>>>>>> which version of the core you're using? Recent version (since 1.94A,
>>>>>>>
>>>>>>> My version is 2.80a.
>>>>>>>
>>>>>>>> IIRC) can manage core suspend automatically. Also, this patch of yours
>>>>>>>> will cause a power consumption regression.
>>>>>>>
>>>>>>> Yes, it can manage core suspend automatically, that is the problem.
>>>>>>> When plugging out one mouse or keypad device, the phy will suspend
>>>>>>> automatically to disable the phy clock. But now the disconnecting
>>>>>>> process is not finished, and some xHCI commands (like deconfiguration
>>>>>>> endpoint command to drop endpoint resources) need depend on the phy
>>>>>>> clock, which will hang on the system to timeout the command or abort
>>>>>>> command ring to halt the xHCI.
>>>>>>>
>>>>>>> I agree with you it will cause a power consumption regression, but it
>>>>>>> will cause serious problem if not. Do you have some suggestion?
>>>>>>
>>>>>> sorry for the long delay. This was lost in my inbox.
>>>>>>
>>>>>> I'm not sure this patch is the best solution. There's no mention in
>>>>>> Databook that we should avoid PHY suspend when acting as host. Adding
>>>>>> John here to see if John has any idea of how to fix this.
>>>>>>
>>>>>
>>>>> I'm not familiar enough with XHCI side of things to say.
>>>>>
>>>>> I'll ask around to see if anyone has an idea.
>>>>
>>>
>>> Hi Felipe, Baolin,
>>>
>>> I talked with a couple engineers here and the behavior is not
>>> something that's expected in host mode.
>>>
>>> Can you check that the value of the GCTL.RAMCLKSEL is set
>>> appropriately? This affects where the core gets the clock signal
>>
>> In host mode, the bit[6:7] for RAMCLKSEL is default value 0, which
>> means it selects bus clock.
>>
>>> from. If it is getting it from the phy clock then you will likely have
>>> this problem and will need to adjust it. Otherwise you should probably
>>> use the existing quirk instead.
>>
>> So the bus clock is from the phy clock, then it will have this problem
>> when suspending phy? Yes, I can use the existing quirk, but I am
>> afraid it is one common problem if we use the mainline kernel. Or we
>> can add some documentation for enabling the phy suspend feature to
>> remind other people.
>>
>
> Hi Baolin,
>
> It's expected the clocks to the PHY and core are different if you
> suspend only the PHY. That's not particular to just the host, for
> example handling LPM in device mode you could have the same problem.

>From Synopsys FAE engineer, she told me it will affect xHCI commands
executing when phy has been suspended. But in device mode, I can not
reproduce this problem, just in host mode with attaching slow devices.

>
> You would have to confirm with your own platform how it is.

Okay, I will.

--
Baolin.wang
Best Regards