Re: [PATCH v3 1/3] dt: bindings: add documentation for zx2967 family reset controller

From: Philipp Zabel
Date: Tue Jan 17 2017 - 04:04:12 EST


On Tue, 2017-01-17 at 11:22 +0800, Baoyou Xie wrote:
> This patch adds dt-binding documentation for zx2967 family
> reset controller.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
> Reviewed-by: Shawn Guo <shawnguo@xxxxxxxxxx>

Thanks, I've applied all three patches with Shawn's Reviewed-by: on the
driver patch.

regards
Philipp

> ---
> .../devicetree/bindings/reset/zte,zx2967-reset.txt | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
>
> diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> new file mode 100644
> index 0000000..b015508
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> @@ -0,0 +1,20 @@
> +ZTE zx2967 SoCs Reset Controller
> +=======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: should be one of the following.
> + * zte,zx296718-reset
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- #reset-cells: must be 1.
> +
> +example:
> +
> + reset: reset-controller@1461060 {
> + compatible = "zte,zx296718-reset";
> + reg = <0x01461060 0x8>;
> + #reset-cells = <1>;
> + };