Re: [PATCH v5 1/2] usb: host: plat: Enable xhci plat runtime PM

From: Baolin Wang
Date: Mon Jan 16 2017 - 05:56:34 EST


Hi Mathias,

On 13 December 2016 at 15:49, Baolin Wang <baolin.wang@xxxxxxxxxx> wrote:
> Enable the xhci plat runtime PM for parent device to suspend/resume xhci.
> Also call pm_runtime_get_noresume() in probe() function in case the parent
> device doesn't call suspend/resume callback by runtime PM now.
>
> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
> ---
> Changes since v4:
> - No updates.
>
> Changes since v3:
> - Fix kbuild error.
>
> Changes since v2:
> - Add pm_runtime_get_noresume() in probe() function.
> - Add pm_runtime_set_suspended()/pm_runtime_put_noidle() in remove() function.
>
> Changes since v1:
> - No updates.
> ---

Do you have any comments about this patch? Thanks.

> drivers/usb/host/xhci-plat.c | 41 ++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 36 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index ed56bf9..5805c6a 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -246,6 +246,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
> if (ret)
> goto dealloc_usb2_hcd;
>
> + pm_runtime_get_noresume(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> return 0;
>
>
> @@ -274,6 +278,10 @@ static int xhci_plat_remove(struct platform_device *dev)
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> struct clk *clk = xhci->clk;
>
> + pm_runtime_set_suspended(&dev->dev);
> + pm_runtime_put_noidle(&dev->dev);
> + pm_runtime_disable(&dev->dev);
> +
> usb_remove_hcd(xhci->shared_hcd);
> usb_phy_shutdown(hcd->usb_phy);
>
> @@ -311,14 +319,37 @@ static int xhci_plat_resume(struct device *dev)
>
> return xhci_resume(xhci, 0);
> }
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int xhci_plat_runtime_suspend(struct device *dev)
> +{
> + struct usb_hcd *hcd = dev_get_drvdata(dev);
> + struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> + return xhci_suspend(xhci, device_may_wakeup(dev));
> +}
> +
> +static int xhci_plat_runtime_resume(struct device *dev)
> +{
> + struct usb_hcd *hcd = dev_get_drvdata(dev);
> + struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> + return xhci_resume(xhci, 0);
> +}
> +
> +static int xhci_plat_runtime_idle(struct device *dev)
> +{
> + return 0;
> +}
> +#endif /* CONFIG_PM */
>
> static const struct dev_pm_ops xhci_plat_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
> +
> + SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, xhci_plat_runtime_resume,
> + xhci_plat_runtime_idle)
> };
> -#define DEV_PM_OPS (&xhci_plat_pm_ops)
> -#else
> -#define DEV_PM_OPS NULL
> -#endif /* CONFIG_PM */
>
> static const struct acpi_device_id usb_xhci_acpi_match[] = {
> /* XHCI-compliant USB Controller */
> @@ -332,7 +363,7 @@ static int xhci_plat_resume(struct device *dev)
> .remove = xhci_plat_remove,
> .driver = {
> .name = "xhci-hcd",
> - .pm = DEV_PM_OPS,
> + .pm = &xhci_plat_pm_ops,
> .of_match_table = of_match_ptr(usb_xhci_of_match),
> .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
> },
> --
> 1.7.9.5
>



--
Baolin.wang
Best Regards