[PATCH v2 5/6] usb: phy: tahvo: Replace the deprecated extcon API

From: Chanwoo Choi
Date: Thu Dec 29 2016 - 23:08:45 EST


This patch replaces the deprecated extcon API as following:
- extcon_set_cable_state_() -> extcon_set_state_sync()

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Acked-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
---
drivers/usb/phy/phy-tahvo.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index ab5d364f6e8c..a31c8682e998 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -121,7 +121,7 @@ static void check_vbus_state(struct tahvo_usb *tu)
prev_state = tu->vbus_state;
tu->vbus_state = reg & TAHVO_STAT_VBUS;
if (prev_state != tu->vbus_state) {
- extcon_set_cable_state_(tu->extcon, EXTCON_USB, tu->vbus_state);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
}
}
@@ -130,7 +130,7 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu)
{
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);

- extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, true);

/* Power up the transceiver in USB host mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
@@ -149,7 +149,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
{
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);

- extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, false);

/* Power up transceiver and set it in USB peripheral mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
@@ -379,9 +379,9 @@ static int tahvo_usb_probe(struct platform_device *pdev)
}

/* Set the initial cable state. */
- extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST,
+ extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST,
tu->tahvo_mode == TAHVO_MODE_HOST);
- extcon_set_cable_state_(tu->extcon, EXTCON_USB, tu->vbus_state);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);

/* Create OTG interface */
tahvo_usb_power_off(tu);
--
1.9.1