[PATCH v7 1/2] Add OV5647 device tree documentation
From: Ramiro Oliveira
Date: Tue Dec 27 2016 - 08:59:51 EST
Create device tree bindings documentation.
Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx>
---
.../devicetree/bindings/media/i2c/ov5647.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
new file mode 100644
index 000000000000..57fd40036c26
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
@@ -0,0 +1,35 @@
+Omnivision OV5647 raw image sensor
+---------------------------------
+
+OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
+and CCI (I2C compatible) control bus.
+
+Required properties:
+
+- compatible : "ovti,ov5647".
+- reg : I2C slave address of the sensor.
+- clocks : Reference to the xclk clock.
+- clock-names : Should be "xclk".
+- clock-frequency : Frequency of the xclk clock.
+
+The common video interfaces bindings (see video-interfaces.txt) should be
+used to specify link to the image data receiver. The OV5647 device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Example:
+
+ i2c@2000 {
+ ...
+ ov: camera@36 {
+ compatible = "ovti,ov5647";
+ reg = <0x36>;
+ clocks = <&camera_clk>;
+ clock-names = "xclk";
+ clock-frequency = <30000000>;
+ port {
+ camera_1: endpoint {
+ remote-endpoint = <&csi1_ep1>;
+ };
+ };
+ };
+ };
--
2.11.0