[PATCH v3 RESEND 11/11] pwm: imx: Add polarity inversion support to i.MX's PWMv2
From: Lukasz Majewski
Date: Mon Dec 26 2016 - 18:17:54 EST
With this patch the polarity settings for i.MX's PWMv2 is now supported
on top of atomic PWM setting
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@xxxxxxxxxxx>
Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxx>
---
Changes for v3:
- None
Changes for v2:
- New patch
---
drivers/pwm/pwm-imx.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index b636526..03b01a4 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -38,6 +38,7 @@
#define MX3_PWMCR_DOZEEN (1 << 24)
#define MX3_PWMCR_WAITEN (1 << 23)
#define MX3_PWMCR_DBGEN (1 << 22)
+#define MX3_PWMCR_POUTC (1 << 18)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_SWR (1 << 3)
@@ -215,6 +216,9 @@ static int imx_pwm_apply_v2(struct pwm_chip *chip, struct pwm_device *pwm,
if (state->enabled)
cr |= MX3_PWMCR_EN;
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ cr |= MX3_PWMCR_POUTC;
+
writel(cr, imx->mmio_base + MX3_PWMCR);
/* Disable the clock if the PWM is being disabled. */
@@ -237,6 +241,7 @@ static struct pwm_ops imx_pwm_ops_v2 = {
};
struct imx_pwm_data {
+ bool polarity_supported;
struct pwm_ops *pwm_ops;
};
@@ -245,6 +250,7 @@ static struct imx_pwm_data imx_pwm_data_v1 = {
};
static struct imx_pwm_data imx_pwm_data_v2 = {
+ .polarity_supported = true,
.pwm_ops = &imx_pwm_ops_v2,
};
@@ -285,6 +291,11 @@ static int imx_pwm_probe(struct platform_device *pdev)
imx->chip.base = -1;
imx->chip.npwm = 1;
imx->chip.can_sleep = true;
+ if (data->polarity_supported) {
+ dev_dbg(&pdev->dev, "PWM supports output inversion\n");
+ imx->chip.of_xlate = of_pwm_xlate_with_flags;
+ imx->chip.of_pwm_n_cells = 3;
+ }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
--
2.1.4