[PATCH v3 RESEND 05/11] pwm: imx: Move PWMv2 software reset code to a separate function
From: Lukasz Majewski
Date: Mon Dec 26 2016 - 18:06:45 EST
The software reset code has been extracted from imx_pwm_config_v2 function
and moved to new one - imx_pwm_sw_reset().
This change reduces the overall size of imx_pwm_config_v2() and prepares
it for atomic PWM operation.
Suggested-by: Stefan Agner <stefan@xxxxxxxx>
Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Stefan Agner <stefan@xxxxxxxx>
Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxx>
---
Changes for v3:
- None
Changes for v2:
- Add missing parenthesis
---
drivers/pwm/pwm-imx.c | 31 +++++++++++++++++++++----------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 8497902..b4e5803 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -119,6 +119,25 @@ static void imx_pwm_disable_v1(struct pwm_chip *chip, struct pwm_device *pwm)
clk_disable_unprepare(imx->clk_per);
}
+static void imx_pwm_sw_reset(struct pwm_chip *chip)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+ struct device *dev = chip->dev;
+ int wait_count = 0;
+ u32 cr;
+
+ writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
+ do {
+ usleep_range(200, 1000);
+ cr = readl(imx->mmio_base + MX3_PWMCR);
+ } while ((cr & MX3_PWMCR_SWR) &&
+ (wait_count++ < MX3_PWM_SWR_LOOP));
+
+ if (cr & MX3_PWMCR_SWR)
+ dev_warn(dev, "software reset timeout\n");
+}
+
+
static int imx_pwm_config_v2(struct pwm_chip *chip,
struct pwm_device *pwm, int duty_ns, int period_ns)
{
@@ -128,7 +147,7 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
unsigned long period_cycles, duty_cycles, prescale;
unsigned int period_ms;
bool enable = pwm_is_enabled(pwm);
- int wait_count = 0, fifoav;
+ int fifoav;
u32 cr, sr;
/*
@@ -151,15 +170,7 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
dev_warn(dev, "there is no free FIFO slot\n");
}
} else {
- writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
- do {
- usleep_range(200, 1000);
- cr = readl(imx->mmio_base + MX3_PWMCR);
- } while ((cr & MX3_PWMCR_SWR) &&
- (wait_count++ < MX3_PWM_SWR_LOOP));
-
- if (cr & MX3_PWMCR_SWR)
- dev_warn(dev, "software reset timeout\n");
+ imx_pwm_sw_reset(chip);
}
c = clk_get_rate(imx->clk_per);
--
2.1.4