Re: [PATCH 1/4] rtc: mcp795: fix invalid month setting.

[Emil Bartczak]

On Mon, Dec 05, 2016 at 11:15:59PM +0100, Alexandre Belloni wrote:
> On 05/12/2016 at 23:03:52 +0100, Emil Bartczak wrote :
> > > 
> > > >  #define MCP795_WRITE	0x12
> > > >  #define MCP795_UNLOCK	0x14
> > > >  #define MCP795_IDWRITE	0x32
> > > > @@ -39,6 +39,7 @@
> > > >  
> > > >  #define MCP795_ST_BIT	0x80
> > > >  #define MCP795_24_BIT	0x40
> > > > +#define MCP795_LP_BIT	0x20
> > > >  
> > > >  static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
> > > >  {
> > > > @@ -108,7 +109,8 @@ static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
> > > >  	data[1] = (data[1] & 0x80) | ((tim->tm_min / 10) << 4) | (tim->tm_min % 10);
> > > >  	data[2] = ((tim->tm_hour / 10) << 4) | (tim->tm_hour % 10);
> > > >  	data[4] = ((tim->tm_mday / 10) << 4) | ((tim->tm_mday) % 10);
> > > > -	data[5] = (data[5] & 0x10) | (tim->tm_mon / 10) | (tim->tm_mon % 10);
> > > > +	data[5] = (data[5] & MCP795_LP_BIT) |
> > > 
> > > You changed 0x10 in MCP795_LP_BIT which you defined as 0x20, is that
> > > right?
> > Yes, it should be 0x20 (checked in datasheet).
> > 
> > > 
> > > This is also an unrelated change.
> > > 
> > > > +			((tim->tm_mon / 10) << 4) | (tim->tm_mon % 10);
> > What do you mean exactly? 
> > That above line of code was moved to the new line? Or that I added
> > shift left operation (tim->tm_mon / 10) << 4)?
> > Changing 0x10 to 0x20 and adding shift right operation fixes the problem.
> > 
> 
> I meant that I feel like changing 0x10 to 0x20 is a separate bugfix from
> adding the shift. At least mention that in the commit message.
Ok, I will improve commit message.

> 
> > > >  
> > > >  	if (tim->tm_year > 100)
> > > >  		tim->tm_year -= 100;
> > > > @@ -137,11 +139,11 @@ static int mcp795_read_time(struct device *dev, struct rtc_time *tim)
> > > >  	if (ret)
> > > >  		return ret;
> > > >  
> > > > -	tim->tm_sec		= ((data[0] & 0x70) >> 4) * 10 + (data[0] & 0x0f);
> > > > -	tim->tm_min		= ((data[1] & 0x70) >> 4) * 10 + (data[1] & 0x0f);
> > > > +	tim->tm_sec	= ((data[0] & 0x70) >> 4) * 10 + (data[0] & 0x0f);
> > > > +	tim->tm_min	= ((data[1] & 0x70) >> 4) * 10 + (data[1] & 0x0f);
> > > >  	tim->tm_hour	= ((data[2] & 0x30) >> 4) * 10 + (data[2] & 0x0f);
> > > >  	tim->tm_mday	= ((data[4] & 0x30) >> 4) * 10 + (data[4] & 0x0f);
> > > > -	tim->tm_mon		= ((data[5] & 0x10) >> 4) * 10 + (data[5] & 0x0f);
> > > > +	tim->tm_mon	= ((data[5] & 0x10) >> 4) * 10 + (data[5] & 0x0f);
> > > 
> > > All those whitespace changes are actually confusing. Please do them in a
> > > separate patch or in your last patch.
> > Ok, I will have a separate patch for them.
> 
> Maybe switching to bcd2bin/bin2bcd first is better as it touches all
> those lines anyway and also solves the shift in mcp795_rtcc_read()
Yes, this is a good idea. I will prepare a new patchset where first patch will provide 
switching to bcd2bin/bin2bcd.

> 
> 
> -- 
> Alexandre Belloni, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

Emil,