Re: [PATCH v3 1/3] ARM: da850: fix infinite loop in clk_set_rate()

From: Sekhar Nori
Date: Mon Dec 05 2016 - 05:17:21 EST


On Monday 05 December 2016 03:39 PM, Bartosz Golaszewski wrote:
> The aemif clock is added twice to the lookup table in da850.c. This
> breaks the children list of pll0_sysclk3 as we're using the same list
> links in struct clk. When calling clk_set_rate(), we get stuck in
> propagate_rate().
>
> Create a separate clock for nand, inheriting the rate of the aemif
> clock and retrieve it in the davinci_nand module.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> ---
> arch/arm/mach-davinci/da850.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
> index e770c97..c008e5e 100644
> --- a/arch/arm/mach-davinci/da850.c
> +++ b/arch/arm/mach-davinci/da850.c
> @@ -367,6 +367,11 @@ static struct clk aemif_clk = {
> .flags = ALWAYS_ENABLED,
> };
>
> +static struct clk aemif_nand_clk = {
> + .name = "nand",
> + .parent = &aemif_clk,
> +};
> +
> static struct clk usb11_clk = {
> .name = "usb11",
> .parent = &pll0_sysclk4,
> @@ -537,7 +542,7 @@ static struct clk_lookup da850_clks[] = {
> CLK("da830-mmc.0", NULL, &mmcsd0_clk),
> CLK("da830-mmc.1", NULL, &mmcsd1_clk),
> CLK("ti-aemif", NULL, &aemif_clk),
> - CLK(NULL, "aemif", &aemif_clk),
> + CLK(NULL, "aemif", &aemif_nand_clk),

Why use a NULL device name here? Same question was asked on v2
submission. Also, can you please make sure you are testing this in both
DT mode (da850-lcdk) and non-DT boot (da850-evm).

Thanks,
Sekhar