[PATCH v2 1/3] ARM: da850: fix infinite loop in clk_set_rate()

From: Bartosz Golaszewski
Date: Fri Dec 02 2016 - 10:39:34 EST


The aemif clock is added twice to the lookup table in da850.c. This
breaks the children list of pll0_sysclk3 as we're using the same list
links in struct clk. When calling clk_set_rate(), we get stuck in
propagate_rate().

Create a separate clock for nand, inheriting the rate of the aemif
clock and retrieve it in the davinci_nand module.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
arch/arm/mach-davinci/da850.c | 7 ++++++-
drivers/mtd/nand/davinci_nand.c | 2 +-
2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index e770c97..1fcc986 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -367,6 +367,11 @@ static struct clk aemif_clk = {
.flags = ALWAYS_ENABLED,
};

+static struct clk nand_clk = {
+ .name = "nand",
+ .parent = &aemif_clk,
+};
+
static struct clk usb11_clk = {
.name = "usb11",
.parent = &pll0_sysclk4,
@@ -537,7 +542,7 @@ static struct clk_lookup da850_clks[] = {
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("ti-aemif", NULL, &aemif_clk),
- CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "nand", &nand_clk),
CLK("ohci-da8xx", "usb11", &usb11_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 27fa8b8..5857d06 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -694,7 +694,7 @@ static int nand_davinci_probe(struct platform_device *pdev)

ret = -EINVAL;

- info->clk = devm_clk_get(&pdev->dev, "aemif");
+ info->clk = devm_clk_get(&pdev->dev, "nand");
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
--
2.9.3