Re: [PATCH 1/3] ARM: dts: at91: add dma1 definition to sama5d2

From: Alexandre Belloni
Date: Fri Dec 02 2016 - 06:28:36 EST


On 01/12/2016 at 11:49:47 +0100, Nicolas Ferre wrote :
> The sama5d2 SoC has a second DMA controller and can be used just like DMA0.
> By default both DMA controllers are configured as "Secure" in
> MATRIX_SPSELR so we can use whichever we want in a "single Secure World"
> configuration.
> Surprisingly the DMA1 has a lower address than DMA0. To avoid confusion
> place it after DMA0 node anyway.
>

sama5d2.dtsi is probably the only one that is properly ordered and I
feel like we should keep it this way.

If one of the nodes is not ordered properly, other ones will follow...
We don't care about the name, it is just an alias. We only care about
the address.


> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> ---
> arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index ceb9783ff7e1..c791ce9c750c 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -395,6 +395,16 @@
> clock-names = "dma_clk";
> };
>
> + /* Place dma1 here despite its address */
> + dma1: dma-controller@f0004000 {
> + compatible = "atmel,sama5d4-dma";
> + reg = <0xf0004000 0x1000>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
> + #dma-cells = <1>;
> + clocks = <&dma1_clk>;
> + clock-names = "dma_clk";
> + };
> +
> pmc: pmc@f0014000 {
> compatible = "atmel,sama5d2-pmc", "syscon";
> reg = <0xf0014000 0x160>;
> --
> 2.9.0
>

--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com