[PATCH 5/7] Documentation: DT: net: cpsw: allow to specify descriptors pool size

[Grygorii Strashko]

Add optional property "descs_pool_size" to specify buffer descriptor's
pool size. The "descs_pool_size" should define total number of CPDMA
CPPI descriptors to be used for both ingress/egress packets
processing. If not specified - the default value 256 will be used
which will allow to place descriptor's pool into the internal CPPI
RAM on most of TI SoC.

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
 Documentation/devicetree/bindings/net/cpsw.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 5ad439f..b99d196 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -35,6 +35,11 @@ Optional properties:
 			  For example in dra72x-evm, pcf gpio has to be
 			  driven low so that cpsw slave 0 and phy data
 			  lines are connected via mux.
+- descs_pool_size	: total number of CPDMA CPPI descriptors to be used for
+			  both ingress/egress packets processing. if not
+			  specified the default value 256 will be used which
+			  will allow to place descriptors pool into the
+			  internal CPPI RAM.
 
 
 Slave Properties:
-- 
2.10.1