[PATCH 1/3] arm64: dts: zx: support cpu-freq for zx296718

From: Baoyou Xie
Date: Thu Dec 01 2016 - 07:03:24 EST


This patch adds the CPU clock phandle in CPU's node
and uses operating-points-v2 to register operating points.

So it can be used by cpufreq-dt driver.

Signed-off-by: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
---
arch/arm64/boot/dts/zte/zx296718.dtsi | 37 +++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index 7a1aed7..16f7d5e 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -44,6 +44,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/zx296718-clock.h>

/ {
compatible = "zte,zx296718";
@@ -81,6 +82,8 @@
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
+ clocks = <&topcrm A53_GATE>;
+ operating-points-v2 = <&cluster0_opp>;
};

cpu1: cpu@1 {
@@ -88,6 +91,7 @@
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};

cpu2: cpu@2 {
@@ -95,6 +99,7 @@
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};

cpu3: cpu@3 {
@@ -102,6 +107,38 @@
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
+ };
+ };
+
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <857000>;
+ clock-latency-ns = <500000>;
+ };
+ opp@648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <857000>;
+ clock-latency-ns = <500000>;
+ };
+ opp@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <882000>;
+ clock-latency-ns = <500000>;
+ };
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <892000>;
+ clock-latency-ns = <500000>;
+ };
+ opp@1188000000 {
+ opp-hz = /bits/ 64 <1188000000>;
+ opp-microvolt = <1009000>;
+ clock-latency-ns = <500000>;
};
};

--
2.7.4