[PATCH V3 for-next 04/11] IB/hns: add self loopback for CM
From: Salil Mehta
Date: Wed Nov 23 2016 - 14:45:13 EST
From: Lijun Ou <oulijun@xxxxxxxxxx>
This patch mainly adds self loopback support for CM.
Signed-off-by: Lijun Ou <oulijun@xxxxxxxxxx>
Signed-off-by: Peter Chen <luck.chen@xxxxxxxxxx>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@xxxxxxxxxx>
Signed-off-by: Salil Mehta <salil.mehta@xxxxxxxxxx>
---
drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 11 +++++++++++
drivers/infiniband/hw/hns/hns_roce_hw_v1.h | 2 ++
2 files changed, 13 insertions(+)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
index 959d5ca..e080dd6 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -32,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/acpi.h>
+#include <linux/etherdevice.h>
#include <rdma/ib_umem.h>
#include "hns_roce_common.h"
#include "hns_roce_device.h"
@@ -72,6 +73,8 @@ int hns_roce_v1_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
int nreq = 0;
u32 ind = 0;
int ret = 0;
+ u8 *smac;
+ int loopback;
if (unlikely(ibqp->qp_type != IB_QPT_GSI &&
ibqp->qp_type != IB_QPT_RC)) {
@@ -129,6 +132,14 @@ int hns_roce_v1_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
UD_SEND_WQE_U32_8_DMAC_5_M,
UD_SEND_WQE_U32_8_DMAC_5_S,
ah->av.mac[5]);
+
+ smac = (u8 *)hr_dev->dev_addr[qp->port];
+ loopback = ether_addr_equal_unaligned(ah->av.mac,
+ smac) ? 1 : 0;
+ roce_set_bit(ud_sq_wqe->u32_8,
+ UD_SEND_WQE_U32_8_LOOPBACK_INDICATOR_S,
+ loopback);
+
roce_set_field(ud_sq_wqe->u32_8,
UD_SEND_WQE_U32_8_OPERATION_TYPE_M,
UD_SEND_WQE_U32_8_OPERATION_TYPE_S,
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.h b/drivers/infiniband/hw/hns/hns_roce_hw_v1.h
index 6004c7f..cf28f1b 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.h
@@ -440,6 +440,8 @@ struct hns_roce_ud_send_wqe {
#define UD_SEND_WQE_U32_8_DMAC_5_M \
(((1UL << 8) - 1) << UD_SEND_WQE_U32_8_DMAC_5_S)
+#define UD_SEND_WQE_U32_8_LOOPBACK_INDICATOR_S 22
+
#define UD_SEND_WQE_U32_8_OPERATION_TYPE_S 16
#define UD_SEND_WQE_U32_8_OPERATION_TYPE_M \
(((1UL << 4) - 1) << UD_SEND_WQE_U32_8_OPERATION_TYPE_S)
--
1.7.9.5