[RFC][PATCH 0/3] adv7511 EDID probing improvements

[John Stultz]

I had been seeing some EDID probing issues with the adv7511 driver
on HiKey recently. After talking with Archit and spending some time
reading the programming guide, I put together the following patch
set which seems to resolve the EDID probing issues.

I wanted to send these out for some early review and feedback

thanks
-john

Cc: David Airlie <airlied@xxxxxxxx>
Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx

Archit Taneja (1):
  drm/bridge: adv7511: Enable HPD interrupts to support hotplug and
    improve monitor detection

John Stultz (2):
  drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be
    reused internally
  drm/bridge: adv7511: Add 200ms delay on power-on

 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 38 +++++++++++++++-------------
 1 file changed, 21 insertions(+), 17 deletions(-)

-- 
2.7.4