[PATCH v2 6/6] arm64: dts: NS2: add AMAC ethernet support

From: Jon Mason
Date: Fri Oct 28 2016 - 16:57:28 EST


Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device
tree

Signed-off-by: Jon Mason <jon.mason@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 5 +++++
arch/arm64/boot/dts/broadcom/ns2.dtsi | 12 ++++++++++++
2 files changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 2d7872a..9e5c3c9 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -56,6 +56,10 @@
};
};

+&enet {
+ status = "ok";
+};
+
&pci_phy0 {
status = "ok";
};
@@ -172,6 +176,7 @@
&mdio_mux_iproc {
mdio@10 {
gphy0: eth-phy@10 {
+ brcm,enet-phy-lane-swap;
reg = <0x10>;
};
};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index d95dc40..773ed59 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -191,6 +191,18 @@

#include "ns2-clock.dtsi"

+ enet: ethernet@61000000 {
+ compatible = "brcm,ns2-amac";
+ reg = <0x61000000 0x1000>,
+ <0x61090000 0x1000>,
+ <0x61030000 0x100>;
+ reg-names = "amac_base", "idm_base", "nicpm_base";
+ interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ phy-handle = <&gphy0>;
+ phy-mode = "rgmii";
+ status = "disabled";
+ };
+
dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
--
2.7.4