Re: [PATCH] pinctrl: freescale: avoid overwriting pin config when freeing GPIO

From: Vladimir Zapolskiy
Date: Tue Sep 27 2016 - 08:12:20 EST


Hi Stefan,

On 09/27/2016 03:26 AM, Stefan Agner wrote:
If a GPIO gets freed after selecting a new pinctrl configuration
the driver should not change pinctrl anymore. Otherwise this will
likely lead to a unusable pin configuration for > the newly selected
pinctrl.

Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
This turned out to be problematic when using the I2C GPIO bus recovery
functionality. After muxing back to I2C, the GPIO is being freed, which
cased I2C to stop working completely.

IMHO this recent "i.MX I2C GPIO bus recovery" feature is kind of a hack,
for example I believe it breaks I2C bus driver initialization on i.MX31
boards, where today there is no pinctrl driver at all.

IMHO something like I've partially described in the recent "Requesting as
a GPIO a pin already used through pinctrl" topic should be done here.
Could you consider to add another pinctrl-1 group with alternative GPIO
line mux/config settings to an i2c controller device node and apply it,
when you need a bus recovery? You may find references how this kind of
dynamic pinctrl management is done within mmc/sd subsystem.

By the way did I miss a patch, which falls back to mux settings on
.gpio_disable_free call for non-Vybrid platforms?

--
With best wishes,
Vladimir