[PATCH RFC v2 net-next 6/8] net: qualcomm: prepare frame decoding for UART driver

From: Stefan Wahren
Date: Mon Sep 26 2016 - 07:09:50 EST


Unfortunately the frame format is not exactly identical between SPI
and UART. In case of SPI there is an additional HW length at the
beginning. So store the initial state to make the decoding state machine
more flexible and easy to extend for UART support.

Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
drivers/net/ethernet/qualcomm/qca_common.c | 12 ++++++------
drivers/net/ethernet/qualcomm/qca_common.h | 8 ++++++--
drivers/net/ethernet/qualcomm/qca_spi.c | 2 +-
3 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_common.c b/drivers/net/ethernet/qualcomm/qca_common.c
index 9020c57..7eefdad 100644
--- a/drivers/net/ethernet/qualcomm/qca_common.c
+++ b/drivers/net/ethernet/qualcomm/qca_common.c
@@ -83,7 +83,7 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by

if (recv_byte != 0x00) {
/* first two bytes of length must be 0 */
- handle->state = QCAFRM_HW_LEN0;
+ handle->state = handle->init;
}
break;
case QCAFRM_HW_LEN2:
@@ -97,7 +97,7 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by
case QCAFRM_WAIT_AA4:
if (recv_byte != 0xAA) {
ret = QCAFRM_NOHEAD;
- handle->state = QCAFRM_HW_LEN0;
+ handle->state = handle->init;
} else {
handle->state--;
}
@@ -119,7 +119,7 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by
len = handle->offset;
if (len > buf_len || len < QCAFRM_ETHMINLEN) {
ret = QCAFRM_INVLEN;
- handle->state = QCAFRM_HW_LEN0;
+ handle->state = handle->init;
} else {
handle->state = (enum qcafrm_state)(len + 1);
/* Remaining number of bytes. */
@@ -135,7 +135,7 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by
case QCAFRM_WAIT_551:
if (recv_byte != 0x55) {
ret = QCAFRM_NOTAIL;
- handle->state = QCAFRM_HW_LEN0;
+ handle->state = handle->init;
} else {
handle->state = QCAFRM_WAIT_552;
}
@@ -143,11 +143,11 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by
case QCAFRM_WAIT_552:
if (recv_byte != 0x55) {
ret = QCAFRM_NOTAIL;
- handle->state = QCAFRM_HW_LEN0;
+ handle->state = handle->init;
} else {
ret = handle->offset;
/* Frame is fully received. */
- handle->state = QCAFRM_HW_LEN0;
+ handle->state = handle->init;
}
break;
}
diff --git a/drivers/net/ethernet/qualcomm/qca_common.h b/drivers/net/ethernet/qualcomm/qca_common.h
index 0fafaaf..c93cfdf07 100644
--- a/drivers/net/ethernet/qualcomm/qca_common.h
+++ b/drivers/net/ethernet/qualcomm/qca_common.h
@@ -62,6 +62,7 @@
#define QCAFRM_ERR_BASE -1000

enum qcafrm_state {
+ /* HW length is only available on SPI */
QCAFRM_HW_LEN0 = 0x8000,
QCAFRM_HW_LEN1 = QCAFRM_HW_LEN0 - 1,
QCAFRM_HW_LEN2 = QCAFRM_HW_LEN1 - 1,
@@ -102,6 +103,8 @@ enum qcafrm_state {
struct qcafrm_handle {
/* Current decoding state */
enum qcafrm_state state;
+ /* Initial state depends on connection type */
+ enum qcafrm_state init;

/* Offset in buffer (borrowed for length too) */
s16 offset;
@@ -114,9 +117,10 @@ u16 qcafrm_create_header(u8 *buf, u16 len);

u16 qcafrm_create_footer(u8 *buf);

-static inline void qcafrm_fsm_init(struct qcafrm_handle *handle)
+static inline void qcafrm_fsm_init_spi(struct qcafrm_handle *handle)
{
- handle->state = QCAFRM_HW_LEN0;
+ handle->init = QCAFRM_HW_LEN0;
+ handle->state = handle->init;
}

/* Gather received bytes and try to extract a full Ethernet frame
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index e0a5020..36ac07d 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -638,7 +638,7 @@ qcaspi_netdev_open(struct net_device *dev)
qca->intr_req = 1;
qca->intr_svc = 0;
qca->sync = QCASPI_SYNC_UNKNOWN;
- qcafrm_fsm_init(&qca->frm_handle);
+ qcafrm_fsm_init_spi(&qca->frm_handle);

qca->spi_thread = kthread_run((void *)qcaspi_spi_thread,
qca, "%s", dev->name);
--
2.1.4