Re: [PATCH] ACPI / button: add support for tablet mode switch

[Zhang Rui]

On ä, 2016-08-31 at 15:33 +0800, Wei-Ning Huang wrote:
> From: Wei-Ning Huang <wnhuang@xxxxxxxxxxxx>
> 
> ACPI PNP device HID 'PNP0C60' is a device that indicates tablet mode
> status. Add support for mapping this device to the SW_TABLET_MODE
> input
> event.
> 
> Signed-off-by: Wei-Ning Huang <wnhuang@xxxxxxxxxxxx>
> ---
> Âdrivers/acpi/button.c | 36 ++++++++++++++++++++++++++++++++++++
> Â1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 148f4e5..50e9de6 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -53,6 +53,11 @@
> Â#define ACPI_BUTTON_DEVICE_NAME_LID	"Lid Switch"
> Â#define ACPI_BUTTON_TYPE_LID		0x05
> Â
> +#define ACPI_BUTTON_SUBCLASS_TABLET	"tablet"
> +#define ACPI_BUTTON_HID_TABLET		"PNP0C60"
> +#define ACPI_BUTTON_DEVICE_NAME_TABLET	"Tablet Mode Switch"
> +#define ACPI_BUTTON_TYPE_TABLET		0x07
> +
> Â#define ACPI_BUTTON_LID_INIT_IGNORE	0x00
> Â#define ACPI_BUTTON_LID_INIT_OPEN	0x01
> Â#define ACPI_BUTTON_LID_INIT_METHOD	0x02
> @@ -70,6 +75,7 @@ static const struct acpi_device_id
> button_device_ids[] = {
> Â	{ACPI_BUTTON_HID_SLEEPF, 0},
> Â	{ACPI_BUTTON_HID_POWER,ÂÂ0},
> Â	{ACPI_BUTTON_HID_POWERF, 0},
> +	{ACPI_BUTTON_HID_TABLET, 0},
> Â	{"", 0},
> Â};
> ÂMODULE_DEVICE_TABLE(acpi, button_device_ids);
> @@ -305,6 +311,23 @@ static void acpi_lid_initialize_state(struct
> acpi_device *device)
> Â	}
> Â}
> Â
> +static int acpi_tablet_send_state(struct acpi_device *device)
> +{
> +	struct acpi_button *button = acpi_driver_data(device);
> +	unsigned long long state;
> +	acpi_status status;
> +
> +	status = acpi_evaluate_integer(device->handle, "_TBL", NULL,
> &state);

Control methods with prefix "_" suggests this is an ACPI predefined
control method, but I can not find it in ACPI spec 6.1.
Can you illustrate me where I can find the definition of _TBL?

thanks,
rui
> +	if (ACPI_FAILURE(status))
> +		return -ENODEV;
> +
> +	/* input layer checks if event is redundant */
> +	input_report_switch(button->input, SW_TABLET_MODE, state);
> +	input_sync(button->input);
> +
> +	return 0;
> +}
> +
> Âstatic void acpi_button_notify(struct acpi_device *device, u32
> event)
> Â{
> Â	struct acpi_button *button = acpi_driver_data(device);
> @@ -318,6 +341,8 @@ static void acpi_button_notify(struct acpi_device
> *device, u32 event)
> Â		input = button->input;
> Â		if (button->type == ACPI_BUTTON_TYPE_LID) {
> Â			acpi_lid_update_state(device);
> +		} else if (button->type == ACPI_BUTTON_TYPE_TABLET)
> {
> +			acpi_tablet_send_state(device);
> Â		} else {
> Â			int keycode;
> Â
> @@ -407,6 +432,11 @@ static int acpi_button_add(struct acpi_device
> *device)
> Â		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
> Â		sprintf(class, "%s/%s",
> Â			ACPI_BUTTON_CLASS,
> ACPI_BUTTON_SUBCLASS_LID);
> +	} else if (!strcmp(hid, ACPI_BUTTON_HID_TABLET)) {
> +		button->type = ACPI_BUTTON_TYPE_TABLET;
> +		strcpy(name, ACPI_BUTTON_DEVICE_NAME_TABLET);
> +		sprintf(class, "%s/%s",
> +			ACPI_BUTTON_CLASS,
> ACPI_BUTTON_SUBCLASS_TABLET);
> Â	} else {
> Â		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
> hid);
> Â		error = -ENODEV;
> @@ -437,6 +467,10 @@ static int acpi_button_add(struct acpi_device
> *device)
> Â	case ACPI_BUTTON_TYPE_LID:
> Â		input_set_capability(input, EV_SW, SW_LID);
> Â		break;
> +
> +	case ACPI_BUTTON_TYPE_TABLET:
> +		input_set_capability(input, EV_SW, SW_TABLET_MODE);
> +		break;
> Â	}
> Â
> Â	error = input_register_device(input);
> @@ -450,6 +484,8 @@ static int acpi_button_add(struct acpi_device
> *device)
> Â		Â*/
> Â		lid_device = device;
> Â	}
> +	if (button->type == ACPI_BUTTON_TYPE_TABLET)
> +		acpi_tablet_send_state(device);
> Â
> Â	printk(KERN_INFO PREFIX "%s [%s]\n", name,
> acpi_device_bid(device));
> Â	return 0;