Re: [PATCH] mtd: nand: Allow MTD_NAND_OMAP2 to be usable on Keystone devices

[Boris Brezillon]

On Wed, 24 Aug 2016 12:25:00 +0300
Roger Quadros <rogerq@xxxxxx> wrote:

> Some Keystone devices (e.g. K2G) include a OMAP NAND IP.
> Allow the NAND driver to be usable for both
> Keystone and OMAP devices.
> 
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>

Applied.

Thanks,

Boris

> ---
>  drivers/mtd/nand/Kconfig | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 21ff580..e6260df 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -88,11 +88,11 @@ config MTD_NAND_AMS_DELTA
>  	  Support for NAND flash on Amstrad E3 (Delta).
>  
>  config MTD_NAND_OMAP2
> -	tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
> -	depends on ARCH_OMAP2PLUS
> +	tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
> +	depends on (ARCH_OMAP2PLUS || ARCH_KEYSTONE)
>  	help
> -          Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
> -	  platforms.
> +          Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
> +	  and Keystone platforms.
>  
>  config MTD_NAND_OMAP_BCH
>  	depends on MTD_NAND_OMAP2