Re: [PATCH] net: phy: micrel: remove suspend/resume

[Florian Fainelli]

Le 24/08/2016 Ã 07:14, Christophe Leroy a Ãcrit :
> 
> 
> Le 23/08/2016 Ã 21:03, Florian Fainelli a Ãcrit :
>> +others,
>>
>> On 08/23/2016 04:13 AM, Christophe Leroy wrote:
>>> In ERRATA DS80000700A dated 05 May 2016, Microship recommends to
>>> not use software power down mode on KSZ8041 family.
>>
>> s/Microship/Microchip/
>>
>>> They say they have no plan to fix this ERRATA in future releases.
>>
>> The errata applies to specific revisions, is this revision present in
>> the lower 4 bits of the MII_PHYSID2 register such that it could be used
>> to key the disabling of the power down?
> 
> It doesn't seem clear to me how this could/should be handled.
> 
> According to the documentation, all variants have the same ID 0x0022151x
> with revision x. A3 has ID 0x00221512 and A4 has 0x00221513.
> According to the doc, the KSZ8041RNLI should has same ID. But according
> to micrel driver, it has ID 0x00221537. And the buggy revision of that
> one is rev A. Is it what the 7 means ?

Humm the revision is typically stored on 4 bits, so 0x7 could mean
anything here, it really depends if how they are allocating their revision.

0b0000 -> A0
0b0001 -> A1
...
0b0110 -> A6
0b0111 -> A7?

Who knows.

> 
> The ERRATA applies to KSZ8041NL revision A4 and to KSZ8041NL-AM revision
> A3. My understanding it that both variants have ID 0x0022151x, ie
> KSZ8041NL-AM revision A3 has ID 0x00221512 and KSZ8041NL revision A4 has
> ID 0x00221513. But KSZ8041NL revision A3 also has ID 0x00221512 and the
> ERRATA doesn't apply to it.
> 
> So what can be done really ? Only apply the fix to ID 0x00221513 (which
> is what I need as I have KSZ8041NL revision A4 on my boards) ? Or apply
> it for all KSZ8041 and KSZ8041RNLI to be on the safe side ?

I would apply it to just the KSZ8041NL rev. A4 for now, ideally we would
want to track down the users of the KSZ8041RNLI and see if somebody
could test that, realistically, we won't be able to, so I would err on
the side of caution at the expense of slightly increased power
consumption for that particular PHY and have a broader match of all the
KSZ8041RNLI potentially affected.

Does that make sense?
-- 
Florian