Re: [PATCH v3 1/5] ARM: dts: exynos: Enable HDMI for Arndale Octa board

[Krzysztof Kozlowski]

On Wed, Aug 24, 2016 at 10:07:15PM +0900, Milo Kim wrote:
> * GPIO for HDMI hot plug detect
>   GPX3_7 is used. The HPD awareness is done when the GPIO is active high and
>   single ended.
> 
> * Enable HDMI block in Exynos5420
>   HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator
>   requires 1.8V LDO7 (PVDD_ANAIP_1V8).
> 
> * Support HDMI display data channel
>   I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
> 
> Cc: Kukjin Kim <kgene@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Milo Kim <woogyom.kim@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> index 39a3b81..2fb5708 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -70,6 +70,19 @@
>  	status = "disabled";
>  };
>

First of all - it looks like these DTS patches do not depend on DRM
part, do they?

> +&hdmi {
> +	hpd-gpios = <&gpx3 7 GPIO_OPEN_SOURCE>;

Are you sure it is open-source type?

> +	vdd_osc-supply = <&ldo7_reg>;
> +	vdd_pll-supply = <&ldo6_reg>;
> +	vdd-supply = <&ldo6_reg>;
> +	ddc = <&i2c_2>;
> +	status = "okay";
> +};
> +
> +&i2c_2 {
> +	status = "okay";

Hm, what is connected here? Please put it in alphabetical order (so
after hsi2c_4).

Best regards,
Krzysztof