Re: [PATCH 1/8] hisi_sas: add internal abort core code

[zhangfei]

On 2016å08æ10æ 21:19, John Garry wrote:
> Add core code for internal abort functionality.
>
> The internal abort features allows the host controller
> to abort commands which are still active in the
> controller but have not yet been sent to the slave
> device.
>
> Typically a command only spends a relatively
> short time in the controller when compared to the
> amount of the time after it is sent to the slave
> device.
> Two modes of internal abort are supported:
> - device
> - individual command
>
> For device, when the internal abort is issued all
> commands in the host for that device are aborted.
> For a single command, only that command is aborted
> if it is still in the host.
>
> In HW the internal abort command is executed
> similar to any other sort of command, like SSP.
>
> Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
> ---
>   drivers/scsi/hisi_sas/hisi_sas.h      |   3 +
>   drivers/scsi/hisi_sas/hisi_sas_main.c | 154 ++++++++++++++++++++++++++++++++++
>   2 files changed, 157 insertions(+)
>
> diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
> index 4731d32..4ae864d 100644
> --- a/drivers/scsi/hisi_sas/hisi_sas.h
> +++ b/drivers/scsi/hisi_sas/hisi_sas.h
> @@ -146,6 +146,9 @@ struct hisi_sas_hw {
>   			struct hisi_sas_slot *slot);
>   	int (*prep_stp)(struct hisi_hba *hisi_hba,
>   			struct hisi_sas_slot *slot);
> +	int (*prep_abort)(struct hisi_hba *hisi_hba,
> +			  struct hisi_sas_slot *slot,
> +			  int device_id, int abort_flag, int tag_to_abort);

How about add comments to abort_flag and tag_to_abort.
As a result, not sure why differently calling in hisi_sas_abort_task
hisi_sas_internal_task_abort(hisi_hba, device, 1, tag);
hisi_sas_internal_task_abort(hisi_hba, device, 0, tag);

Thanks