Re: [PATCH V1] mfd: da9053: ensure the FAULT_LOG is cleared during MFD driver probe

From: Lee Jones
Date: Mon Aug 15 2016 - 09:36:07 EST


On Mon, 15 Aug 2016, Steve Twiss wrote:

> > On 08 August 2016 12:06, Steve Twiss wrote:
> > > On 05 August 2016 10:05, Lee Jones wrote:
> > > > On Wed, 06 Jul 2016, Steve Twiss wrote:
> > > > > From: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
> > > > >
> > > > > Clearance of any the persistent information within the DA9053 FAULT_LOG
> > > > > register must be completed during start-up so the fault-log does not
> > > > > continue with previous values. A clearance function has been added here in
> > > > > the kernel driver because wiping the fault-log cannot be counted on outside
> > > > > the Linux kernel.
> > >
> > > [...]
> > >
> > > >
> > > > Looks like much of the same code. Can you have a pop at generifying
> > > > this to avoid any unnecessary duplication?
> > >
> > > Hi Lee,
> > >
> > > Although the function looks like those found in both the DA9062 and DA9063 drivers, I was just
> > > intending to highlight the "requirement similarities" to clear the fault register on start-up. This
> > > requirement for the Dialog PMIC chips extends across those devices, but the function is not
> > > really general enough to be merged into the kernel core or reused across other Dialog devices.
> > >
> > > I don't think there is unnecessary duplication in this particular case for the DA9052/53 driver.
> > >
> > > This da9052_clear_fault_log() function will apply to both the Dialog DA9052 and DA9053 PMICs
> > > and so I am making good use of code re-use in this place. But, this does not extend to the
> > > DA9062 or DA9063.
> > >
> > > I don't think this FAULT_LOG clearance function in this case is really open to generalisation past
> > > the DA9052/53 driver.
> >
> > Hi Lee,
> >
> [...]
> > The fault log function is individual for each chip and would be customisable to meet the needs
> > of the customer's target platform.
> >
> > The function is meant to be individual. This allows for multiple chips in the same platform -- each
> > fault log function could be cleared slightly differently in that case.
> [...]
>
> Hi Lee,
> Do you have any further thoughts on this topic?

I have it marked as "TODO" in my Inbox.

The plan is to have a `brain diff` when I can find some free time.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog