[PATCH 1/7] ARM: dts: STiH407: Move pio20 node to fix kernel warning

From: Lee Jones
Date: Mon Aug 15 2016 - 08:19:43 EST


From: Patrice Chotard <patrice.chotard@xxxxxx>

cat /sys/kernel/debug/pinctrl/921f080.pin-controller-front1/pingroups
leads to the kernel warning:

[ 86.083560] st-pinctrl 921f080.pin-controller-front1: failed to get pin(-517) name
[ 86.091192] ------------[ cut here ]------------
[ 86.095897] WARNING: CPU: 0 PID: 1579 at drivers/pinctrl/core.c:1414 pinctrl_groups_show+0x144/0x16c
[ 86.105072] Modules linked in:
[ 86.108127] CPU: 0 PID: 1579 Comm: cat Tainted: G W 4.6.0-00011-g9ba82e2-dirty #5
[ 86.116728] Hardware name: STiH415/416 SoC with Flattened Device Tree
[ 86.123194] [<c010fa90>] (unwind_backtrace) from [<c010bea8>] (show_stack+0x10/0x14)
[ 86.130943] [<c010bea8>] (show_stack) from [<c038c5b0>] (dump_stack+0x98/0xac)
[ 86.138167] [<c038c5b0>] (dump_stack) from [<c0129b58>] (__warn+0xe8/0x100)
[ 86.145121] [<c0129b58>] (__warn) from [<c0129c20>] (warn_slowpath_null+0x20/0x28)
[ 86.152681] [<c0129c20>] (warn_slowpath_null) from [<c03bf810>] (pinctrl_groups_show+0x144/0x16c)
[ 86.161550] [<c03bf810>] (pinctrl_groups_show) from [<c0218a5c>] (seq_read+0x1ec/0x4c0)
[ 86.169553] [<c0218a5c>] (seq_read) from [<c01f66f0>] (__vfs_read+0x20/0xd0)
[ 86.176592] [<c01f66f0>] (__vfs_read) from [<c01f7414>] (vfs_read+0x7c/0x104)
[ 86.183716] [<c01f7414>] (vfs_read) from [<c01f81a0>] (SyS_read+0x44/0x9c)
[ 86.190585] [<c01f81a0>] (SyS_read) from [<c0108400>] (ret_fast_syscall+0x0/0x3c)
[ 86.198158] ---[ end trace 1aa2e3ae820eeb3e ]---

Move the pincontroller pio20 node above the tsin4 node, which referred
to it, fix this warning.

Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxx>
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a538ae5..bd53c74 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -916,6 +916,15 @@
interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;

+ pio20: pio@09210000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO20";
+ };
+
tsin4 {
pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
st,pins {
@@ -927,15 +936,6 @@
};
};
};
-
- pio20: pio@09210000 {
- gpio-controller;
- #gpio-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x0 0x100>;
- st,bank-name = "PIO20";
- };
};

pin-controller-rear {
--
2.9.0