[PATCH v4 0/4] Add support for the Qualcomm PM8018 PMIC

[Neil Armstrong]

In order to support the Qualcomm MDM9615 in the Sierra Wireless WP8548
Modules, add the PM8018 PMIC support into MFD, Regulator, RTC and input.

This patchset is part of a global SoC + Module + Board support for the
Sierra Wireless mangOH Board support with the WP8548 module.

Changes since v3 at http://lkml.kernel.org/r/1468936331-2981-1-git-send-email-narmstrong@xxxxxxxxxxxx :
 - Use pm8921_regs for rtc, drop mp8018 identical structs
 - Use pm8960 rpm_reg_parts for regulator, drop pm8018 identical structs

Changes since v2 at http://lkml.kernel.org/r/1466759887-25394-1-git-send-email-narmstrong@xxxxxxxxxxxx :
 - Dropped pwrkey changes

Changes since v1 at http://lkml.kernel.org/r/1466158929-19524-1-git-send-email-narmstrong@xxxxxxxxxxxx :
 - Rebase mfd/qcom_rpm.c on top of Linus "fix offset error for msm8660" and "parametrize also ack selector size" patches
 - Rename QCOM_RPM_NCP in to QCOM_RPM_PM8018_NCP
 - Rebased qcom-rpm.h PM8018 defines numbers without a gap
 - Dropped regulator corner

Neil Armstrong (4):
  mfd: pm8921: Add support for pm8018
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator

 .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |  1 +
 Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 15 +++++
 drivers/mfd/pm8921-core.c                          |  1 +
 drivers/mfd/qcom_rpm.c                             | 51 +++++++++++++++++
 drivers/regulator/qcom_rpm-regulator.c             | 66 ++++++++++++++++++++++
 drivers/rtc/rtc-pm8xxx.c                           |  1 +
 include/dt-bindings/mfd/qcom-rpm.h                 | 22 ++++++++
 7 files changed, 157 insertions(+)

-- 
1.9.1