Re: [PATCH v6 3/3] mfd: lpc_ich: Add support for Intel Apollo Lake GPIO pinctrl in non-ACPI system

From: Lee Jones
Date: Tue Aug 09 2016 - 03:14:45 EST

Next message: Hanjun Guo: "[RFC PATCH 10/10] irqchip: mbigen: Add ACPI support"
Previous message: Hanjun Guo: "[RFC PATCH 01/10] irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, 14 Jul 2016, Tan Jui Nee wrote:

> This driver uses the P2SB hide/unhide mechanism cooperatively
> to pass the PCI BAR address to the gpio platform driver.
>
> Signed-off-by: Tan Jui Nee <jui.nee.tan@xxxxxxxxx>
> ---
> Changes in V6:
> - Rename CONFIG_X86_INTEL_APL to CONFIG_X86_INTEL_IVI so that it
> relates to the actual product, as suggested by Mika.
> - Rework Makefile according Andy's comments.
> - Rename lpc_ich_misc() to lpc_ich_add_gpio() so that the name should not
> be so generic, as suggested by Andy.
> - Call lpc_ich_add_gpio() via priv->chipset.
> - lpc_ich_add_gpio() function will be moved from
> .../include/linux/mfd/lpc_ich.h to
> .../drivers/mfd/lpc_ich-apl.h
> as this is a part of internal driver interface as suggested by Andy.
> - Move enum lpc_chipsets from
> .../drivers/mfd/lpc_ich-core.c to
> .../include/linux/mfd/lpc_ich.h
> as lpc_chipsets is also accessed by lpc_ich_add_gpio().
> - Check if kasprintf return value for all 4 gpio controllers before
> proceed to add platform device by using mfd_add_devices().
>
> Changes in V5:
> - Split lpc-ich driver into two parts (lpc_ich-core and lpc_ich-apl).
> The file lpc_ich-apl.c introduces gpio platform driver in MFD.
> - Rename Kconfig option CONFIG_X86_INTEL_NON_ACPI to CONFIG_X86_INTEL_APL
> so that it reflects actual product as suggested by Mika.
>
> Changes in V4:
> - Move Kconfig option CONFIG_X86_INTEL_NON_ACPI from
> [PATCH 2/3] x86/platform/p2sb: New Primary to Sideband bridge support driver for Intel SOC's
> to
> [PATCH 3/3] mfd: lpc_ich: Add support for Intel Apollo Lake GPIO pinctrl in non-ACPI system
> since the config is used in latter patch.
> - Select CONFIG_P2SB when CONFIG_LPC_ICH is enabled.
> - Remove #ifdef CONFIG_X86_INTEL_NON_ACPI and use
> #if defined(CONFIG_X86_INTEL_NON_ACPI) when lpc_ich_misc is called
> as suggested by Lee Jones.
> - Use single dimensional array instead of 2D array for apl_gpio_io_res
> structure and use DEFINE_RES_IRQ for its IRQ resource.
>
> Changes in V3:
> - Simplify register addresses calculation and use DEFINE_RES_MEM_NAMED
> defines for apl_gpio_io_res structure
> - Define magic number for P2SB PCI ID
> - Replace switch-case with if-else since currently we have only one
> use case
> - Only call mfd_add_devices() once for all gpio communities
>
> Changes in V2:
> - Add new config option CONFIG_X86_INTEL_NON_ACPI and "select PINCTRL"
> to fix kbuildbot error
>
> arch/x86/Kconfig | 9 +++
> drivers/mfd/Kconfig | 3 +-
> drivers/mfd/Makefile | 5 +-
> drivers/mfd/lpc_ich-apl.c | 130 ++++++++++++++++++++++++++++++++++++++++++++
> drivers/mfd/lpc_ich-apl.h | 28 ++++++++++
> drivers/mfd/lpc_ich-core.c | 81 ++++-----------------------
> include/linux/mfd/lpc_ich.h | 73 +++++++++++++++++++++++++
> 7 files changed, 256 insertions(+), 73 deletions(-)
> create mode 100644 drivers/mfd/lpc_ich-apl.c
> create mode 100644 drivers/mfd/lpc_ich-apl.h
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index d305d81..c0b427b 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -513,6 +513,15 @@ config X86_INTEL_CE
> This option compiles in support for the CE4100 SOC for settop
> boxes and media devices.
>
> +config X86_INTEL_IVI
> + bool "Intel in-vehicle infotainment (IVI) systems used in cars"
> + select PINCTRL
> + ---help---
> + Select this option to enable MMIO BAR access over the P2SB for
> + non-ACPI Intel Apollo Lake SoC platforms. This driver uses the P2SB
> + hide/unhide mechanism cooperatively to pass the PCI BAR address to
> + the platform driver, currently GPIO.
> +

This should be a separate patch.

> config X86_INTEL_MID
> bool "Intel MID platform support"
> depends on X86_EXTENDED_PLATFORM
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 1bcf601..dc4e543 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -369,8 +369,9 @@ config MFD_INTEL_QUARK_I2C_GPIO
>
> config LPC_ICH
> tristate "Intel ICH LPC"
> - depends on PCI
> + depends on X86 && PCI
> select MFD_CORE
> + select P2SB
> help
> The LPC bridge function of the Intel ICH provides support for
> many functional units. This driver provides needed support for
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 1dfe5fb..0aa3e1f 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -155,8 +155,11 @@ obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
> obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o
> obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o
> obj-$(CONFIG_LPC_SCH) += lpc_sch.o
> -lpc_ich-objs := lpc_ich-core.o
> obj-$(CONFIG_LPC_ICH) += lpc_ich.o
> +lpc_ich-objs := lpc_ich-core.o
> +ifeq ($(CONFIG_X86_INTEL_IVI),y)
> +lpc_ich-objs += lpc_ich-apl.o
> +endif
> obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
> obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o
> obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o
> diff --git a/drivers/mfd/lpc_ich-apl.c b/drivers/mfd/lpc_ich-apl.c
> new file mode 100644
> index 0000000..e4b9688
> --- /dev/null
> +++ b/drivers/mfd/lpc_ich-apl.c
> @@ -0,0 +1,130 @@
> +/*
> + * Purpose: Create a platform device to bind with Intel Apollo Lake

Never seen this before. Looks like more of a commit log entry than
something that should live in a source file header.

> + * Pinctrl GPIO platform driver

No need to mention "platform driver" here. Most drivers are.

> + * Copyright (C) 2016 Intel Corporation

Author?

> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/pci.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/lpc_ich.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <asm/p2sb.h>

Alphabetical.

> +#include "lpc_ich-apl.h"

Don't' mix '_'s with '-'s.

> +/* Offset data for Apollo Lake GPIO communities */
> +#define APL_GPIO_SOUTHWEST_OFFSET 0xc00000
> +#define APL_GPIO_NORTHWEST_OFFSET 0xc40000
> +#define APL_GPIO_NORTH_OFFSET 0xc50000
> +#define APL_GPIO_WEST_OFFSET 0xc70000
> +
> +#define APL_GPIO_SOUTHWEST_NPIN 43
> +#define APL_GPIO_NORTHWEST_NPIN 77
> +#define APL_GPIO_NORTH_NPIN 78
> +#define APL_GPIO_WEST_NPIN 47
> +
> +#define APL_GPIO_IRQ 14
> +
> +#define PCI_IDSEL_P2SB 0x0d
> +
> +static struct resource apl_gpio_io_res[] = {
> + DEFINE_RES_MEM_NAMED(APL_GPIO_NORTH_OFFSET,
> + APL_GPIO_NORTH_NPIN * SZ_8, "apl_pinctrl_n"),
> + DEFINE_RES_MEM_NAMED(APL_GPIO_NORTHWEST_OFFSET,
> + APL_GPIO_NORTHWEST_NPIN * SZ_8, "apl_pinctrl_nw"),
> + DEFINE_RES_MEM_NAMED(APL_GPIO_WEST_OFFSET,
> + APL_GPIO_WEST_NPIN * SZ_8, "apl_pinctrl_w"),
> + DEFINE_RES_MEM_NAMED(APL_GPIO_SOUTHWEST_OFFSET,
> + APL_GPIO_SOUTHWEST_NPIN * SZ_8, "apl_pinctrl_sw"),
> + DEFINE_RES_IRQ(APL_GPIO_IRQ),
> +};
> +
> +static struct pinctrl_pin_desc apl_pinctrl_pdata;

This seems pretty pointless. What's it for?

> +static struct mfd_cell apl_gpio_devices[] = {
> + {
> + .name = "apl-pinctrl",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(apl_gpio_io_res),
> + .resources = apl_gpio_io_res,
> + .pdata_size = sizeof(apl_pinctrl_pdata),
> + .platform_data = &apl_pinctrl_pdata,
> + .ignore_resource_conflicts = true,
> + },
> + {
> + .name = "apl-pinctrl",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(apl_gpio_io_res),
> + .resources = apl_gpio_io_res,
> + .pdata_size = sizeof(apl_pinctrl_pdata),
> + .platform_data = &apl_pinctrl_pdata,
> + .ignore_resource_conflicts = true,
> + },
> + {
> + .name = "apl-pinctrl",
> + .id = 2,
> + .num_resources = ARRAY_SIZE(apl_gpio_io_res),
> + .resources = apl_gpio_io_res,
> + .pdata_size = sizeof(apl_pinctrl_pdata),
> + .platform_data = &apl_pinctrl_pdata,
> + .ignore_resource_conflicts = true,
> + },
> + {
> + .name = "apl-pinctrl",
> + .id = 3,
> + .num_resources = ARRAY_SIZE(apl_gpio_io_res),
> + .resources = apl_gpio_io_res,
> + .pdata_size = sizeof(apl_pinctrl_pdata),
> + .platform_data = &apl_pinctrl_pdata,
> + .ignore_resource_conflicts = true,
> + },
> +};
> +
> +int lpc_ich_add_gpio(struct pci_dev *dev, enum lpc_chipsets chipset)
> +{
> + unsigned int apl_p2sb = PCI_DEVFN(PCI_IDSEL_P2SB, 0);

You only use this variable one. Just switch it out for the macro.

> + unsigned int i;
> + int ret;
> +
> + if (chipset != LPC_APL)
> + return -ENODEV;
> + /*
> + * Apollo lake, has not 1, but 4 gpio controllers,
> + * handle it a bit differently.
> + */
> +
> + for (i = 0; i < ARRAY_SIZE(apl_gpio_io_res)-1; i++) {

This is fragile. Just define a GPIO_CONTROLLER_COUNT or similar.

> + struct resource *res = &apl_gpio_io_res[i];
> +
> + apl_gpio_devices[i].resources = res;

What's happening here? Are you manually pulling resources out of the
resource structure and linking them to the device cells?

Why?

> + /* Fill MEM resource */
> + ret = p2sb_bar(dev, apl_p2sb, res++);

Why res++?

> + if (ret)
> + goto warn_continue;
> +
> + apl_pinctrl_pdata.name = kasprintf(GFP_KERNEL, "%u",
> + i + 1);

Are you sure this does what you think it does?

I think you will keep changing *.name, and the only one you will
see/use is the last one.

Have you tested this?

> + if (apl_pinctrl_pdata.name == NULL) {
> + ret = -ENOMEM;
> + goto warn_continue;

No, this is a failure. You need to 'error' out and return ret.

> + }
> + }
> +
> + ret = mfd_add_devices(&dev->dev, 0,
> + apl_gpio_devices, ARRAY_SIZE(apl_gpio_devices),
> + NULL, 0, NULL);
> +
> +warn_continue:
> + if (ret)
> + dev_warn(&dev->dev,
> + "Failed to add Apollo Lake GPIO %s: %d\n",
> + apl_pinctrl_pdata.name, ret);
> +
> + kfree(apl_pinctrl_pdata.name);

You've just passed the child device a NULL pointer.

> + return 0;

Why are you returning 0 even during failure?

> +}
> diff --git a/drivers/mfd/lpc_ich-apl.h b/drivers/mfd/lpc_ich-apl.h
> new file mode 100644
> index 0000000..db8325d
> --- /dev/null
> +++ b/drivers/mfd/lpc_ich-apl.h
> @@ -0,0 +1,28 @@
> +/*
> + * lpc_ich-apl.h - Intel in-vehicle infotainment (IVI) systems used in cars
> + * support

The "In", "Vehicle" and "Infotainment" should be capitalised.

> + * Copyright (C) 2016, Intel Corporation
> + *
> + * Authors: Tan, Jui Nee <jui.nee.tan@xxxxxxxxx>

"Author"

> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __LPC_ICH_APL_H__
> +#define __LPC_ICH_APL_H__
> +
> +#include <linux/pci.h>
> +
> +#if IS_ENABLED(CONFIG_X86_INTEL_IVI)
> +int lpc_ich_add_gpio(struct pci_dev *dev, enum lpc_chipsets chipset);
> +#else /* CONFIG_X86_INTEL_IVI is not set */
> +static inline int lpc_ich_add_gpio(struct pci_dev *dev, enum lpc_chipsets chipset)
> +{
> + return -ENODEV;
> +}
> +#endif
> +
> +#endif
> diff --git a/drivers/mfd/lpc_ich-core.c b/drivers/mfd/lpc_ich-core.c
> index bd3aa45..e09d1e2 100644
> --- a/drivers/mfd/lpc_ich-core.c
> +++ b/drivers/mfd/lpc_ich-core.c
> @@ -69,6 +69,8 @@
> #include <linux/mfd/lpc_ich.h>
> #include <linux/platform_data/itco_wdt.h>
>
> +#include "lpc_ich-apl.h"
> +
> #define ACPIBASE 0x40
> #define ACPIBASE_GPE_OFF 0x28
> #define ACPIBASE_GPE_END 0x2f
> @@ -147,77 +149,6 @@ static struct mfd_cell lpc_ich_gpio_cell = {
> .ignore_resource_conflicts = true,
> };
>
> -/* chipset related info */
> -enum lpc_chipsets {
> - LPC_ICH = 0, /* ICH */
> - LPC_ICH0, /* ICH0 */
> - LPC_ICH2, /* ICH2 */
> - LPC_ICH2M, /* ICH2-M */
> - LPC_ICH3, /* ICH3-S */
> - LPC_ICH3M, /* ICH3-M */
> - LPC_ICH4, /* ICH4 */
> - LPC_ICH4M, /* ICH4-M */
> - LPC_CICH, /* C-ICH */
> - LPC_ICH5, /* ICH5 & ICH5R */
> - LPC_6300ESB, /* 6300ESB */
> - LPC_ICH6, /* ICH6 & ICH6R */
> - LPC_ICH6M, /* ICH6-M */
> - LPC_ICH6W, /* ICH6W & ICH6RW */
> - LPC_631XESB, /* 631xESB/632xESB */
> - LPC_ICH7, /* ICH7 & ICH7R */
> - LPC_ICH7DH, /* ICH7DH */
> - LPC_ICH7M, /* ICH7-M & ICH7-U */
> - LPC_ICH7MDH, /* ICH7-M DH */
> - LPC_NM10, /* NM10 */
> - LPC_ICH8, /* ICH8 & ICH8R */
> - LPC_ICH8DH, /* ICH8DH */
> - LPC_ICH8DO, /* ICH8DO */
> - LPC_ICH8M, /* ICH8M */
> - LPC_ICH8ME, /* ICH8M-E */
> - LPC_ICH9, /* ICH9 */
> - LPC_ICH9R, /* ICH9R */
> - LPC_ICH9DH, /* ICH9DH */
> - LPC_ICH9DO, /* ICH9DO */
> - LPC_ICH9M, /* ICH9M */
> - LPC_ICH9ME, /* ICH9M-E */
> - LPC_ICH10, /* ICH10 */
> - LPC_ICH10R, /* ICH10R */
> - LPC_ICH10D, /* ICH10D */
> - LPC_ICH10DO, /* ICH10DO */
> - LPC_PCH, /* PCH Desktop Full Featured */
> - LPC_PCHM, /* PCH Mobile Full Featured */
> - LPC_P55, /* P55 */
> - LPC_PM55, /* PM55 */
> - LPC_H55, /* H55 */
> - LPC_QM57, /* QM57 */
> - LPC_H57, /* H57 */
> - LPC_HM55, /* HM55 */
> - LPC_Q57, /* Q57 */
> - LPC_HM57, /* HM57 */
> - LPC_PCHMSFF, /* PCH Mobile SFF Full Featured */
> - LPC_QS57, /* QS57 */
> - LPC_3400, /* 3400 */
> - LPC_3420, /* 3420 */
> - LPC_3450, /* 3450 */
> - LPC_EP80579, /* EP80579 */
> - LPC_CPT, /* Cougar Point */
> - LPC_CPTD, /* Cougar Point Desktop */
> - LPC_CPTM, /* Cougar Point Mobile */
> - LPC_PBG, /* Patsburg */
> - LPC_DH89XXCC, /* DH89xxCC */
> - LPC_PPT, /* Panther Point */
> - LPC_LPT, /* Lynx Point */
> - LPC_LPT_LP, /* Lynx Point-LP */
> - LPC_WBG, /* Wellsburg */
> - LPC_AVN, /* Avoton SoC */
> - LPC_BAYTRAIL, /* Bay Trail SoC */
> - LPC_COLETO, /* Coleto Creek */
> - LPC_WPT_LP, /* Wildcat Point-LP */
> - LPC_BRASWELL, /* Braswell SoC */
> - LPC_LEWISBURG, /* Lewisburg */
> - LPC_9S, /* 9 Series */
> -};

What does this move have to do with this patch?

I think it should be separate and be paired with a reason for the
change.

> static struct lpc_ich_info lpc_chipset_info[] = {
> [LPC_ICH] = {
> .name = "ICH",
> @@ -531,6 +462,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
> .name = "9 Series",
> .iTCO_version = 2,
> },
> + [LPC_APL] = {
> + .name = "Apollo Lake SoC",
> + .iTCO_version = 5,
> + },

Enabling a new platform should be a separate patch.

> };
>
> /*
> @@ -679,6 +614,7 @@ static const struct pci_device_id lpc_ich_ids[] = {
> { PCI_VDEVICE(INTEL, 0x3b14), LPC_3420},
> { PCI_VDEVICE(INTEL, 0x3b16), LPC_3450},
> { PCI_VDEVICE(INTEL, 0x5031), LPC_EP80579},
> + { PCI_VDEVICE(INTEL, 0x5ae8), LPC_APL},
> { PCI_VDEVICE(INTEL, 0x8c40), LPC_LPT},
> { PCI_VDEVICE(INTEL, 0x8c41), LPC_LPT},
> { PCI_VDEVICE(INTEL, 0x8c42), LPC_LPT},
> @@ -1093,6 +1029,9 @@ static int lpc_ich_probe(struct pci_dev *dev,
> cell_added = true;
> }
>
> + if (!lpc_ich_add_gpio(dev, priv->chipset))
> + cell_added = true;
> +
> /*
> * We only care if at least one or none of the cells registered
> * successfully.
> diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h
> index 2b300b4..03c2ca3 100644
> --- a/include/linux/mfd/lpc_ich.h
> +++ b/include/linux/mfd/lpc_ich.h
> @@ -34,6 +34,7 @@ enum {
> ICH_V10CORP_GPIO,
> ICH_V10CONS_GPIO,
> AVOTON_GPIO,
> + APL_GPIO,
> };
>
> struct lpc_ich_info {
> @@ -43,4 +44,76 @@ struct lpc_ich_info {
> u8 use_gpio;
> };
>
> +/* chipset related info */
> +enum lpc_chipsets {
> + LPC_ICH = 0, /* ICH */
> + LPC_ICH0, /* ICH0 */
> + LPC_ICH2, /* ICH2 */
> + LPC_ICH2M, /* ICH2-M */
> + LPC_ICH3, /* ICH3-S */
> + LPC_ICH3M, /* ICH3-M */
> + LPC_ICH4, /* ICH4 */
> + LPC_ICH4M, /* ICH4-M */
> + LPC_CICH, /* C-ICH */
> + LPC_ICH5, /* ICH5 & ICH5R */
> + LPC_6300ESB, /* 6300ESB */
> + LPC_ICH6, /* ICH6 & ICH6R */
> + LPC_ICH6M, /* ICH6-M */
> + LPC_ICH6W, /* ICH6W & ICH6RW */
> + LPC_631XESB, /* 631xESB/632xESB */
> + LPC_ICH7, /* ICH7 & ICH7R */
> + LPC_ICH7DH, /* ICH7DH */
> + LPC_ICH7M, /* ICH7-M & ICH7-U */
> + LPC_ICH7MDH, /* ICH7-M DH */
> + LPC_NM10, /* NM10 */
> + LPC_ICH8, /* ICH8 & ICH8R */
> + LPC_ICH8DH, /* ICH8DH */
> + LPC_ICH8DO, /* ICH8DO */
> + LPC_ICH8M, /* ICH8M */
> + LPC_ICH8ME, /* ICH8M-E */
> + LPC_ICH9, /* ICH9 */
> + LPC_ICH9R, /* ICH9R */
> + LPC_ICH9DH, /* ICH9DH */
> + LPC_ICH9DO, /* ICH9DO */
> + LPC_ICH9M, /* ICH9M */
> + LPC_ICH9ME, /* ICH9M-E */
> + LPC_ICH10, /* ICH10 */
> + LPC_ICH10R, /* ICH10R */
> + LPC_ICH10D, /* ICH10D */
> + LPC_ICH10DO, /* ICH10DO */
> + LPC_PCH, /* PCH Desktop Full Featured */
> + LPC_PCHM, /* PCH Mobile Full Featured */
> + LPC_P55, /* P55 */
> + LPC_PM55, /* PM55 */
> + LPC_H55, /* H55 */
> + LPC_QM57, /* QM57 */
> + LPC_H57, /* H57 */
> + LPC_HM55, /* HM55 */
> + LPC_Q57, /* Q57 */
> + LPC_HM57, /* HM57 */
> + LPC_PCHMSFF, /* PCH Mobile SFF Full Featured */
> + LPC_QS57, /* QS57 */
> + LPC_3400, /* 3400 */
> + LPC_3420, /* 3420 */
> + LPC_3450, /* 3450 */
> + LPC_EP80579, /* EP80579 */
> + LPC_CPT, /* Cougar Point */
> + LPC_CPTD, /* Cougar Point Desktop */
> + LPC_CPTM, /* Cougar Point Mobile */
> + LPC_PBG, /* Patsburg */
> + LPC_DH89XXCC, /* DH89xxCC */
> + LPC_PPT, /* Panther Point */
> + LPC_LPT, /* Lynx Point */
> + LPC_LPT_LP, /* Lynx Point-LP */
> + LPC_WBG, /* Wellsburg */
> + LPC_AVN, /* Avoton SoC */
> + LPC_BAYTRAIL, /* Bay Trail SoC */
> + LPC_COLETO, /* Coleto Creek */
> + LPC_WPT_LP, /* Wildcat Point-LP */
> + LPC_BRASWELL, /* Braswell SoC */
> + LPC_LEWISBURG, /* Lewisburg */
> + LPC_9S, /* 9 Series */
> + LPC_APL, /* Apollo Lake SoC */
> +};
> +
> #endif

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Next message: Hanjun Guo: "[RFC PATCH 10/10] irqchip: mbigen: Add ACPI support"
Previous message: Hanjun Guo: "[RFC PATCH 01/10] irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]