Re: [Patch v3 08/11] driver/edac/fsl_ddr: Add support of little endian

From: Borislav Petkov
Date: Mon Aug 08 2016 - 04:50:27 EST


On Thu, Aug 04, 2016 at 03:58:33PM -0700, York Sun wrote:
> Get endianness from device tree. Both big endian and little endian
> are supported. Default to big endian for backward compatibility to
> MPC85xx.
>
> Signed-off-by: York Sun <york.sun@xxxxxxx>
>
> ---
> Change log
> v3: no change
> v2: Separated from "Add support for ARM-based SoCs" patch
>
> .../fsl/ddr.txt} | 6 ++
> drivers/edac/fsl_ddr_edac.c | 83 ++++++++++++++--------
> 2 files changed, 58 insertions(+), 31 deletions(-)
> rename Documentation/devicetree/bindings/{powerpc/fsl/mem-ctrlr.txt => memory-controllers/fsl/ddr.txt} (74%)
>
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mem-ctrlr.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
> similarity index 74%
> rename from Documentation/devicetree/bindings/powerpc/fsl/mem-ctrlr.txt
> rename to Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
> index f87856f..62623f9 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/mem-ctrlr.txt
> +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
> @@ -7,6 +7,10 @@ Properties:
> "fsl,qoriq-memory-controller".
> - reg : Address and size of DDR controller registers
> - interrupts : Error interrupt of DDR controller
> +- little-endian : Specifies little-endian access to registers
> +- big-endian : Specifies big-endian access to registers
> +
> +If both little-endian and big-endian are omitted, big-endian will be used.
>
> Example 1:
>
> @@ -14,6 +18,7 @@ Example 1:
> compatible = "fsl,bsc9132-memory-controller";
> reg = <0x2000 0x1000>;
> interrupts = <16 2 1 8>;
> + big-endian;
> };
>
>
> @@ -24,4 +29,5 @@ Example 2:
> "fsl,qoriq-memory-controller";
> reg = <0x8000 0x1000>;
> interrupts = <16 2 1 23>;
> + big-endian;
> };

This needs an ACK from DT maintainers. They're on CC.

> diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
> index 88ecf7d..b1b7924 100644
> --- a/drivers/edac/fsl_ddr_edac.c
> +++ b/drivers/edac/fsl_ddr_edac.c

...

> @@ -470,6 +483,13 @@ int fsl_ddr_mc_err_probe(struct platform_device *op)
> mci->ctl_name = pdata->name;
> mci->dev_name = pdata->name;
>
> + if (of_find_property(op->dev.of_node, "little-endian", NULL))
> + little_endian = true;
> + else if (of_find_property(op->dev.of_node, "big-endian", NULL))
> + little_endian = false;
> + else
> + little_endian = false;

What happened here?

Considering little_endian is static, this should suffice for its
initialization:

if (of_find_property(op->dev.of_node, "little-endian", NULL))
little_endian = true;




> res = of_address_to_resource(op->dev.of_node, 0, &r);
> if (res) {
> pr_err("%s: Unable to get resource for MC err regs\n",
> @@ -492,7 +512,7 @@ int fsl_ddr_mc_err_probe(struct platform_device *op)
> goto err;
> }
>
> - sdram_ctl = in_be32(pdata->mc_vbase + MC_DDR_SDRAM_CFG);
> + sdram_ctl = ddr_in32(pdata->mc_vbase + MC_DDR_SDRAM_CFG);
> if (!(sdram_ctl & DSC_ECC_EN)) {
> /* no ECC */
> pr_warn("%s: No ECC DIMMs discovered\n", __func__);
> @@ -520,11 +540,11 @@ int fsl_ddr_mc_err_probe(struct platform_device *op)
>
> /* store the original error disable bits */
> orig_ddr_err_disable =
> - in_be32(pdata->mc_vbase + MC_ERR_DISABLE);
> - out_be32(pdata->mc_vbase + MC_ERR_DISABLE, 0);
> + ddr_in32(pdata->mc_vbase + MC_ERR_DISABLE);
> + ddr_out32(pdata->mc_vbase + MC_ERR_DISABLE, 0);
>
> /* clear all error bits */
> - out_be32(pdata->mc_vbase + MC_ERR_DETECT, ~0);
> + ddr_out32(pdata->mc_vbase + MC_ERR_DETECT, ~0);
>
> if (edac_mc_add_mc_with_groups(mci, fsl_ddr_dev_groups)) {
> edac_dbg(3, "failed edac_mc_add_mc()\n");
> @@ -532,15 +552,15 @@ int fsl_ddr_mc_err_probe(struct platform_device *op)
> }
>
> if (edac_op_state == EDAC_OPSTATE_INT) {
> - out_be32(pdata->mc_vbase + MC_ERR_INT_EN,
> - DDR_EIE_MBEE | DDR_EIE_SBEE);
> + ddr_out32(pdata->mc_vbase + MC_ERR_INT_EN,
> + DDR_EIE_MBEE | DDR_EIE_SBEE);
>
> /* store the original error management threshold */
> - orig_ddr_err_sbe = in_be32(pdata->mc_vbase +
> + orig_ddr_err_sbe = ddr_in32(pdata->mc_vbase +
> MC_ERR_SBE) & 0xff0000;
>
> /* set threshold to 1 error per interrupt */
> - out_be32(pdata->mc_vbase + MC_ERR_SBE, 0x10000);
> + ddr_out32(pdata->mc_vbase + MC_ERR_SBE, 0x10000);
>
> /* register interrupts */
> pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
> @@ -573,6 +593,7 @@ err:
> edac_mc_free(mci);
> return res;
> }
> +EXPORT_SYMBOL_GPL(fsl_ddr_mc_err_probe);

What's that export for?

--
Regards/Gruss,
Boris.

ECO tip #101: Trim your mails when you reply.
--