[PATCH v4 7/7] doc: bindings: act8945a-charger: Update properties

From: Wenyou Yang
Date: Mon Aug 08 2016 - 02:25:17 EST


Due the driver improvements, update the properties,
- Remove "active-semi,check-battery-temperature" property.
- Add the properties, "active-semi,irq_gpio"
and "active-semi,lbo-gpios".

Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>
---

Changes in v4:
- Update the doc/binding for using "interrupts" property.

Changes in v3: None
Changes in v2: None

.../devicetree/bindings/power/act8945a-charger.txt | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/act8945a-charger.txt b/Documentation/devicetree/bindings/power/act8945a-charger.txt
index bea254c..f9866c4 100644
--- a/Documentation/devicetree/bindings/power/act8945a-charger.txt
+++ b/Documentation/devicetree/bindings/power/act8945a-charger.txt
@@ -4,10 +4,15 @@ Required properties:
- compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
- active-semi,chglev-gpios: charge current level phandle with args
as described in ../gpio/gpio.txt.
+ - active-semi,lbo-gpios: specify the low battery voltage detect phandle
+ with args as as described in ../gpio/gpio.txt.
+ - interrupts: <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt.
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.

Optional properties:
- - active-semi,check-battery-temperature: boolean to check the battery
- temperature or not.
- active-semi,input-voltage-threshold-microvolt: unit: mV;
Specifies the charger's input over-voltage threshold value;
The value can be: 6600, 7000, 7500, 8000; default: 6600
@@ -27,9 +32,14 @@ Example:
status = "okay";

pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev>;
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+
active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
+ interrupt-parent = <&pioA>;
+ interrupts = <45 GPIO_ACTIVE_LOW>;
+
};
--
2.7.4