[PATCH v4 3/8] media: adv7180: add support for NEWAVMODE

From: Steve Longerbeam
Date: Wed Aug 03 2016 - 14:06:26 EST


Parse the optional v4l2 endpoint DT node. If the bus type is
V4L2_MBUS_BT656 and the endpoint node specifies "newavmode",
configure the BT.656 bus in NEWAVMODE.

Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>

---

v4: no changes
v3:
- the newavmode endpoint property is now private to adv7180.
---
.../devicetree/bindings/media/i2c/adv7180.txt | 4 ++
drivers/media/i2c/adv7180.c | 46 ++++++++++++++++++++--
2 files changed, 47 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
index 0d50115..6c175d2 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
@@ -15,6 +15,10 @@ Required Properties :
"adi,adv7282"
"adi,adv7282-m"

+Optional Endpoint Properties :
+- newavmode: a boolean property to indicate the BT.656 bus is operating
+ in Analog Device's NEWAVMODE. Valid for BT.656 busses only.
+
Example:

i2c0@1c22000 {
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 6e093c22..467953e 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -31,6 +31,7 @@
#include <media/v4l2-event.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
#include <linux/mutex.h>
#include <linux/delay.h>

@@ -106,6 +107,7 @@
#define ADV7180_REG_SHAP_FILTER_CTL_1 0x0017
#define ADV7180_REG_CTRL_2 0x001d
#define ADV7180_REG_VSYNC_FIELD_CTL_1 0x0031
+#define ADV7180_VSYNC_FIELD_CTL_1_NEWAVMODE 0x02
#define ADV7180_REG_MANUAL_WIN_CTL_1 0x003d
#define ADV7180_REG_MANUAL_WIN_CTL_2 0x003e
#define ADV7180_REG_MANUAL_WIN_CTL_3 0x003f
@@ -214,6 +216,7 @@ struct adv7180_state {
struct mutex mutex; /* mutual excl. when accessing chip */
int irq;
v4l2_std_id curr_norm;
+ bool newavmode;
bool powered;
bool streaming;
u8 input;
@@ -864,9 +867,15 @@ static int adv7180_init(struct adv7180_state *state)
if (ret < 0)
return ret;

- /* Manually set V bit end position in NTSC mode */
- return adv7180_write(state, ADV7180_REG_NTSC_V_BIT_END,
- ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+ if (!state->newavmode) {
+ /* Manually set V bit end position in NTSC mode */
+ ret = adv7180_write(state, ADV7180_REG_NTSC_V_BIT_END,
+ ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
}

static int adv7180_set_std(struct adv7180_state *state, unsigned int std)
@@ -1217,6 +1226,13 @@ static int init_device(struct adv7180_state *state)
if (ret)
goto out_unlock;

+ if (state->newavmode) {
+ ret = adv7180_write(state, ADV7180_REG_VSYNC_FIELD_CTL_1,
+ ADV7180_VSYNC_FIELD_CTL_1_NEWAVMODE);
+ if (ret < 0)
+ goto out_unlock;
+ }
+
ret = adv7180_program_std(state);
if (ret)
goto out_unlock;
@@ -1257,6 +1273,28 @@ out_unlock:
return ret;
}

+static void adv7180_of_parse(struct adv7180_state *state)
+{
+ struct i2c_client *client = state->client;
+ struct device_node *np = client->dev.of_node;
+ struct device_node *endpoint;
+ struct v4l2_of_endpoint ep;
+
+ endpoint = of_graph_get_next_endpoint(np, NULL);
+ if (!endpoint) {
+ v4l_warn(client, "endpoint node not found\n");
+ return;
+ }
+
+ v4l2_of_parse_endpoint(endpoint, &ep);
+ if (ep.bus_type == V4L2_MBUS_BT656) {
+ if (of_property_read_bool(endpoint, "newavmode"))
+ state->newavmode = true;
+ }
+
+ of_node_put(endpoint);
+}
+
static int adv7180_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1279,6 +1317,8 @@ static int adv7180_probe(struct i2c_client *client,
state->field = V4L2_FIELD_ALTERNATE;
state->chip_info = (struct adv7180_chip_info *)id->driver_data;

+ adv7180_of_parse(state);
+
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
state->csi_client = i2c_new_dummy(client->adapter,
ADV7180_DEFAULT_CSI_I2C_ADDR);
--
1.9.1