Re: [PATCH v3 6/7] PM / devfreq: rockchip: add devfreq driver for rk3399 dmc

From: Paul Gortmaker
Date: Fri Jul 22 2016 - 16:24:48 EST


On Fri, Jul 22, 2016 at 5:07 AM, Lin Huang <hl@xxxxxxxxxxxxxx> wrote:
> base on dfi result, we do ddr frequency scaling, register
> dmc driver to devfreq framework, and use simple-ondemand
> policy.
>
> Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
> ---
> Changes in v3:
> - operate dram setting through sip call
> - imporve set rate flow
>
> Changes in v2:
> - None
>
> Changes in v1:
> - move dfi controller to event
> - fix set voltage sequence when set rate fail
> - change Kconfig type from tristate to bool
> - move unuse EXPORT_SYMBOL_GPL()
>
> drivers/devfreq/Kconfig | 1 +
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/rockchip/Kconfig | 15 +
> drivers/devfreq/rockchip/Makefile | 2 +
> drivers/devfreq/rockchip/rk3399_dmc.c | 482 ++++++++++++++++++++++++++++++++
> drivers/devfreq/rockchip/rockchip_dmc.c | 143 ++++++++++
> include/soc/rockchip/rockchip_dmc.h | 45 +++
> 7 files changed, 689 insertions(+)
> create mode 100644 drivers/devfreq/rockchip/Kconfig
> create mode 100644 drivers/devfreq/rockchip/Makefile
> create mode 100644 drivers/devfreq/rockchip/rk3399_dmc.c
> create mode 100644 drivers/devfreq/rockchip/rockchip_dmc.c
> create mode 100644 include/soc/rockchip/rockchip_dmc.h
>
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index a5be56e..cb67246 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -101,5 +101,6 @@ config ARM_TEGRA_DEVFREQ
> operating frequencies and voltages with OPP support.
>
> source "drivers/devfreq/event/Kconfig"
> +source "drivers/devfreq/rockchip/Kconfig"
>
> endif # PM_DEVFREQ
> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> index 09f11d9..48e2ae6 100644
> --- a/drivers/devfreq/Makefile
> +++ b/drivers/devfreq/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o
> # DEVFREQ Drivers
> obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o
> obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o
> +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
>
> # DEVFREQ Event Drivers
> obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/
> diff --git a/drivers/devfreq/rockchip/Kconfig b/drivers/devfreq/rockchip/Kconfig
> new file mode 100644
> index 0000000..7fb1cff
> --- /dev/null
> +++ b/drivers/devfreq/rockchip/Kconfig
> @@ -0,0 +1,15 @@
> +config ARM_ROCKCHIP_DMC_DEVFREQ
> + bool "ARM ROCKCHIP DMC DEVFREQ Driver"
> + depends on ARCH_ROCKCHIP
> + help
> + This adds the DEVFREQ driver framework for the rockchip dmc.
> +
> +config ARM_RK3399_DMC_DEVFREQ
> + bool "ARM RK3399 DMC DEVFREQ Driver"

Since you are using bool Kconfigs for your driver, please do not use
module.h or MODULE_<xyz> tags in your driver, and use the builtin
register function.

Alternatively if there really is a use case for it to be a modular driver
then use a tristate Kconfig.

THanks,
Paul.
--

> + depends on ARM_ROCKCHIP_DMC_DEVFREQ
> + select PM_OPP
> + select DEVFREQ_GOV_SIMPLE_ONDEMAND
> + help
> + This adds the DEVFREQ driver for the RK3399 dmc. It sets the frequency
> + for the memory controller and reads the usage counts from hardware.
> +