Re: [PATCH v4 1/2] ACPI / button: Add KEY_LID_OPEN/KEY_LID_CLOSE for new usage model

From: Benjamin Tissoires
Date: Tue Jul 19 2016 - 04:46:16 EST


On Tue, Jul 19, 2016 at 10:11 AM, Lv Zheng <lv.zheng@xxxxxxxxx> wrote:
> There are many AML tables reporting wrong initial lid state, and some of
> them never report lid open state. As a proxy layer acting between, ACPI
> button driver is not able to handle all such cases, but need to re-define
> the usage model of the ACPI lid. That is:
> 1. It's initial state is not reliable;
> 2. There may not be an open event;
> 3. Userspace should only take action against the close event which is
> reliable, always sent after a real lid close.
>
> OTOH, using an input switch event for the lid device on such platforms can
> cause the loss of the close event, but the platforms purposely want to use
> these close events to trigger power saving actions.
>
> So we need to introduce a new ABI, which is input key events based, not
> input switch events based.
>
> This patch adds a set of new input key events so that the new userspace
> programs can use them to handle this usage model correctly. And in the
> meanwhile, the old input switch event is kept so that no old programs will
> be broken by the ABI change.
>
> Signed-off-by: Lv Zheng <lv.zheng@xxxxxxxxx>
> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> Cc: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
> Cc: Bastien Nocera: <hadess@xxxxxxxxxx>
> Cc: linux-input@xxxxxxxxxxxxxxx
> ---

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>

Cheers,
Benjamin

> drivers/acpi/button.c | 34 +++++++++++++++++++++++++++++++-
> include/uapi/linux/input-event-codes.h | 7 +++++++
> 2 files changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 148f4e5..dd16879 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -104,6 +104,8 @@ struct acpi_button {
> struct input_dev *input;
> char phys[32]; /* for input device */
> unsigned long pushed;
> + int last_state;
> + unsigned long timestamp;
> bool suspended;
> };
>
> @@ -111,6 +113,10 @@ static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
> static struct acpi_device *lid_device;
> static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
>
> +static unsigned long lid_report_interval __read_mostly = 500;
> +module_param(lid_report_interval, ulong, 0644);
> +MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
> +
> /* --------------------------------------------------------------------------
> FS Interface (/proc)
> -------------------------------------------------------------------------- */
> @@ -133,12 +139,34 @@ static int acpi_lid_evaluate_state(struct acpi_device *device)
> static int acpi_lid_notify_state(struct acpi_device *device, int state)
> {
> struct acpi_button *button = acpi_driver_data(device);
> + int keycode;
> + unsigned long timeout;
> int ret;
>
> - /* input layer checks if event is redundant */
> + /*
> + * Send the switch event.
> + * The input layer checks if the event is redundant.
> + */
> input_report_switch(button->input, SW_LID, !state);
> input_sync(button->input);
>
> + /*
> + * Send the key event.
> + * The input layer doesn't check if the event is redundant.
> + */
> + timeout = button->timestamp +
> + msecs_to_jiffies(lid_report_interval);
> + if (button->last_state != !!state ||
> + time_after(jiffies, timeout)) {
> + keycode = state ? KEY_LID_OPEN : KEY_LID_CLOSE;
> + input_report_key(button->input, keycode, 1);
> + input_sync(button->input);
> + input_report_key(button->input, keycode, 0);
> + input_sync(button->input);
> + button->last_state = !!state;
> + button->timestamp = jiffies;
> + }
> +
> if (state)
> pm_wakeup_event(&device->dev, 0);
>
> @@ -407,6 +435,8 @@ static int acpi_button_add(struct acpi_device *device)
> strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
> sprintf(class, "%s/%s",
> ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
> + button->last_state = !!acpi_lid_evaluate_state(device);
> + button->timestamp = jiffies;
> } else {
> printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
> error = -ENODEV;
> @@ -436,6 +466,8 @@ static int acpi_button_add(struct acpi_device *device)
>
> case ACPI_BUTTON_TYPE_LID:
> input_set_capability(input, EV_SW, SW_LID);
> + input_set_capability(input, EV_KEY, KEY_LID_OPEN);
> + input_set_capability(input, EV_KEY, KEY_LID_CLOSE);
> break;
> }
>
> diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
> index 737fa32..b062fe1 100644
> --- a/include/uapi/linux/input-event-codes.h
> +++ b/include/uapi/linux/input-event-codes.h
> @@ -641,6 +641,13 @@
> * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
> */
> #define KEY_DATA 0x275
> +/*
> + * Key events sent by the lid drivers.
> + * The drivers may not be able to send paired "open"/"close" events, in
> + * which case, they send KEY_LID_OPEN/KEY_LID_CLOSE instead of SW_LID.
> + */
> +#define KEY_LID_OPEN 0x278
> +#define KEY_LID_CLOSE 0x279
>
> #define BTN_TRIGGER_HAPPY 0x2c0
> #define BTN_TRIGGER_HAPPY1 0x2c0
> --
> 1.7.10
>