[PATCH 38/93] clocksource/drivers/pxa: Convert init function to return error

From: Daniel Lezcano
Date: Thu Jul 07 2016 - 04:03:48 EST


The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly

or

- print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/clocksource/pxa_timer.c | 46 +++++++++++++++++++++++++++++------------
1 file changed, 33 insertions(+), 13 deletions(-)

diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c
index 45b6a49..59af75c 100644
--- a/drivers/clocksource/pxa_timer.c
+++ b/drivers/clocksource/pxa_timer.c
@@ -150,8 +150,10 @@ static struct irqaction pxa_ost0_irq = {
.dev_id = &ckevt_pxa_osmr0,
};

-static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
+static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
{
+ int ret;
+
timer_writel(0, OIER);
timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);

@@ -159,41 +161,59 @@ static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)

ckevt_pxa_osmr0.cpumask = cpumask_of(0);

- setup_irq(irq, &pxa_ost0_irq);
+ ret = setup_irq(irq, &pxa_ost0_irq);
+ if (ret) {
+ pr_err("Failed to setup irq");
+ return ret;
+ }
+
+ ret = clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200,
+ 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("Failed to init clocksource");
+ return ret;
+ }

- clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200,
- 32, clocksource_mmio_readl_up);
clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
MIN_OSCR_DELTA * 2, 0x7fffffff);
+
+ return 0;
}

-static void __init pxa_timer_dt_init(struct device_node *np)
+static int __init pxa_timer_dt_init(struct device_node *np)
{
struct clk *clk;
- int irq;
+ int irq, ret;

/* timer registers are shared with watchdog timer */
timer_base = of_iomap(np, 0);
- if (!timer_base)
- panic("%s: unable to map resource\n", np->name);
+ if (!timer_base) {
+ pr_err("%s: unable to map resource\n", np->name);
+ return -ENXIO;
+ }

clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_crit("%s: unable to get clk\n", np->name);
- return;
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_crit("Failed to prepare clock");
+ return ret;
}
- clk_prepare_enable(clk);

/* we are only interested in OS-timer0 irq */
irq = irq_of_parse_and_map(np, 0);
if (irq <= 0) {
pr_crit("%s: unable to parse OS-timer0 irq\n", np->name);
- return;
+ return -EINVAL;
}

- pxa_timer_common_init(irq, clk_get_rate(clk));
+ return pxa_timer_common_init(irq, clk_get_rate(clk));
}
-CLOCKSOURCE_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);
+CLOCKSOURCE_OF_DECLARE_RET(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);

/*
* Legacy timer init for non device-tree boards.
--
1.9.1