Re: [PATCH 3/6] Clocksource: add nuc970 clocksource driver

[Wan Zongshun]

On 2016å06æ29æ 23:25, Arnd Bergmann wrote:
> On Saturday, June 25, 2016 6:37:19 PM CEST Wan Zongshun wrote:
> > This patch is to add nuc970 clocksource driver support.
> >
> > Signed-off-by: Wan Zongshun <mcuos.com@xxxxxxxxx>
> > ---
> >   .../mach-w90x900/include/mach/nuc970-regs-timer.h  |  44 +++++
> >   drivers/clocksource/Kconfig                        |   8 +
> >   drivers/clocksource/Makefile                       |   1 +
> >   drivers/clocksource/timer-nuc900.c                 | 207 +++++++++++++++++++++
> >   4 files changed, 260 insertions(+)
> >   create mode 100644 arch/arm/mach-w90x900/include/mach/nuc970-regs-timer.h
> >   create mode 100644 drivers/clocksource/timer-nuc900.c
> >
> > diff --git a/arch/arm/mach-w90x900/include/mach/nuc970-regs-timer.h b/arch/arm/mach-w90x900/include/mach/nuc970-regs-timer.h
> > new file mode 100644
> > index 0000000..43d7e8b
> > --- /dev/null
> > +++ b/arch/arm/mach-w90x900/include/mach/nuc970-regs-timer.h
>
> Please move the contents of the header file into the driver. We try to not
> have any new mach/*.h headers.

Ok, done.

> > +
> > +static unsigned int timer0_load;
> > +static void __iomem *tmr_base;
> > +
> > +static int nuc970_clockevent_set_oneshot(struct clock_event_device *evt)
> > +{
> > +	unsigned int val;
> > +
> > +	val = __raw_readl(tmr_base + REG_TMR_TCSR0);
> > +	val &= ~(0x03 << 27);
> > +
> > +	val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
> > +
> > +	__raw_writel(val, tmr_base + REG_TMR_TCSR0);
> > +	return 0;
> > +}
> > +
>
> writel() instead of __raw_writel()

Ok, so this change will apply to all drivers.

> 	Arnd
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel