Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation

From: Jonathan Cameron
Date: Sun Jul 03 2016 - 08:01:41 EST


On 02/07/16 14:35, Alexandre Belloni wrote:
> On 02/07/2016 at 17:12:55 +0800, Chen-Yu Tsai wrote :
>> Hi,
>>
>> On Sat, Jul 2, 2016 at 5:00 AM, Alexandre Belloni
>> <alexandre.belloni@xxxxxxxxxxxxxxxxxx> wrote:
>>> Document the bindings for the Allwinner LRADC.
>>
>> We already have Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
>> and I'm pretty sure Hans (CC-ed) argued that this is not a generic ADC
>> block.
>>
>> Any plans to reconcile the different bindings?
>>
>
> Yes, I already submitted an adc-keys driver that can work with any ADC:
> https://lkml.org/lkml/2016/7/1/670
>
> I agree that because it is not yet handling interrupts and is polling
> the ADC, it is not as good as sun4i-lradc-keys yet. My plan is to solve
> that but it require significant work in iio.
>
As I'm having fun confusing the two drivers submitted for different
ADCs on the A10 this morning - here is the relevant bit of text I stuck
in my review for the other driver...

For the key detection you have already observed that IIO needs some
additions to be able to have consumers of what we term 'events' e.g. threshold
interrupts.

Looking at the lradc-keys driver in tree, it looks like we only really have
really simple threshold interrups - configured to detect a very low voltage?
+ only one per channel.

So not too nasty a case, but you are right some work is needed in IIO as
we simply don't have a means of passing these on as yet or configuring them
from in kernel consumers.
If we take the easy route and don't demux incoming events then it shouldn't
be too hard to add (demux can follow later). Hence any client device can try
to enable events it wants, but may get events that other client devices wanted
as well.

Config interface should be much the same as the write support for channels.
Data flow marginally harder, but pretty much a list of callbacks within
iio_push_event.

Not trivial, but not too tricky either.

The events subsystem has a few 'limitations' we need to address long term
but as this is in kernel interface only, we can do this now and fix stuff
up in future without any ABI breakage. (limitations are things like only
one event of a given type and direction per channel - main challenge on
that is finding a way of doing it without abi breakage).

Anyhow, sounds fun - wish I had the time to do it myself!
Jonathan