Re: [PATCHv4 1/1] thermal: core: call thermal_zone_device_update() after mode update

[Eduardo Valentin]

On Wed, Jun 29, 2016 at 02:23:22PM +0800, Zhang Rui wrote:
> Hi, Eduardo,
> 
> as the locking patch set has not been in upstream yet, you should
> either fold this fix into patch 02/15, or rebase your locking patch
> series on top of this fix.

I am folding into 02/15 and resending only the new version of that
patch. Are you OK to pick it up like that?

> 
> thanks,
> rui
> 
> On ä, 2016-06-22 at 08:03 -0700, Eduardo Valentin wrote:
> > Because several drivers do the following pattern:
> > .set_mode()
> > ÂÂÂ...
> > ÂÂÂlocal_data->mode = new_mode;
> > ÂÂÂthermal_zone_device_update(tz);
> > 
> > makes sense to simply do the thermal_zone_device_update()
> > in thermal core, after setting the new mode.
> > 
> > Also, this patch also remove deadlocks on drivers that
> > call thermal_zone_device_update() on .set_mode(),
> > as .set_mode()ÂÂis now called always with tz->lock held.
> > 
> > Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
> > Cc: Len Brown <lenb@xxxxxxxxxx>
> > Cc: linux-acpi@xxxxxxxxxxxxxxx
> > Cc: "Lee, Chun-Yi" <jlee@xxxxxxxx>
> > Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
> > Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
> > Cc: Keerthy <j-keerthy@xxxxxx>
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: linux-omap@xxxxxxxxxxxxxxx
> > Cc: platform-driver-x86@xxxxxxxxxxxxxxx
> > Cc: linux-pm@xxxxxxxxxxxxxxx
> > Signed-off-by: Eduardo Valentin <edubezval@xxxxxxxxx>
> > ---
> > Hello,
> > 
> > V3->V4:
> > - ti-soc: Removed extra locking from TI SoC in set_mode
> > - ACPI: Kept the update on check as it is called on other places
> > 
> > BR,
> > 
> > Eduardo
> > 
> > Âdrivers/acpi/thermal.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 1 -
> > Âdrivers/platform/x86/acerhdf.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 1 -
> > Âdrivers/thermal/imx_thermal.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 1 -
> > Âdrivers/thermal/of-thermal.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 5 -----
> > Âdrivers/thermal/thermal_sysfs.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 1 +
> > Âdrivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 -----
> > Â6 files changed, 1 insertion(+), 13 deletions(-)
> > 
> > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> > index 82707f9..03c3460 100644
> > --- a/drivers/acpi/thermal.c
> > +++ b/drivers/acpi/thermal.c
> > @@ -581,7 +581,6 @@ static int thermal_set_mode(struct
> > thermal_zone_device *thermal,
> > Â		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> > Â			"%s kernel ACPI thermal control\n",
> > Â			tz->tz_enabled ? "Enable" : "Disable"));
> > -		acpi_thermal_check(tz);
> > Â	}
> > Â	return 0;
> > Â}
> > diff --git a/drivers/platform/x86/acerhdf.c
> > b/drivers/platform/x86/acerhdf.c
> > index 460fa67..aee33ba 100644
> > --- a/drivers/platform/x86/acerhdf.c
> > +++ b/drivers/platform/x86/acerhdf.c
> > @@ -405,7 +405,6 @@ static inline void
> > acerhdf_enable_kernelmode(void)
> > Â	kernelmode = 1;
> > Â
> > Â	thz_dev->polling_delay = interval*1000;
> > -	thermal_zone_device_update(thz_dev);
> > Â	pr_notice("kernel mode fan control ON\n");
> > Â}
> > Â
> > diff --git a/drivers/thermal/imx_thermal.c
> > b/drivers/thermal/imx_thermal.c
> > index c5547bd..a413eb6 100644
> > --- a/drivers/thermal/imx_thermal.c
> > +++ b/drivers/thermal/imx_thermal.c
> > @@ -246,7 +246,6 @@ static int imx_set_mode(struct
> > thermal_zone_device *tz,
> > Â	}
> > Â
> > Â	data->mode = mode;
> > -	thermal_zone_device_update(tz);
> > Â
> > Â	return 0;
> > Â}
> > diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-
> > thermal.c
> > index b8e509c..95c47da 100644
> > --- a/drivers/thermal/of-thermal.c
> > +++ b/drivers/thermal/of-thermal.c
> > @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct
> > thermal_zone_device *tz,
> > Â{
> > Â	struct __thermal_zone *data = tz->devdata;
> > Â
> > -	mutex_lock(&tz->lock);
> > -
> > Â	if (mode == THERMAL_DEVICE_ENABLED)
> > Â		tz->polling_delay = data->polling_delay;
> > Â	else
> > Â		tz->polling_delay = 0;
> > Â
> > -	mutex_unlock(&tz->lock);
> > -
> > Â	data->mode = mode;
> > -	thermal_zone_device_update(tz);
> > Â
> > Â	return 0;
> > Â}
> > diff --git a/drivers/thermal/thermal_sysfs.c
> > b/drivers/thermal/thermal_sysfs.c
> > index 743df50..3d0dc30 100644
> > --- a/drivers/thermal/thermal_sysfs.c
> > +++ b/drivers/thermal/thermal_sysfs.c
> > @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct
> > device_attribute *attr,
> > Â	mutex_lock(&tz->lock);
> > Â	result = tz->ops->set_mode(tz, mode);
> > Â	mutex_unlock(&tz->lock);
> > +	thermal_zone_device_update(tz);
> > Â
> > Â	if (result)
> > Â		return result;
> > diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > index 15c0a9a..5dce053 100644
> > --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct
> > thermal_zone_device *thermal,
> > Â		return 0;
> > Â	}
> > Â
> > -	mutex_lock(&data->ti_thermal->lock);
> > -
> > Â	if (mode == THERMAL_DEVICE_ENABLED)
> > Â		data->ti_thermal->polling_delay =
> > FAST_TEMP_MONITORING_RATE;
> > Â	else
> > Â		data->ti_thermal->polling_delay = 0;
> > Â
> > -	mutex_unlock(&data->ti_thermal->lock);
> > -
> > Â	data->mode = mode;
> > Â	ti_bandgap_write_update_interval(bgp, data->sensor_id,
> > Â					data->ti_thermal-
> > >polling_delay);
> > -	thermal_zone_device_update(data->ti_thermal);
> > Â	dev_dbg(&thermal->device, "thermal polling set for
> > duration=%d msec\n",
> > Â		data->ti_thermal->polling_delay);
> > Â