[PATCH 3/3] Documentation: mmc: add description for new no-sd* and no-mmc

[Shawn Lin]

This patch adds description for no-sd, no-sdio, no-mmc. We
expect the specific boards adds these in DT to improve
the initialization. For instance, for a soldered eMMC slot,
we could skip sending SDIO and SD commands to probe its card
types as it's always should be the type fo MMC card.

Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---

 Documentation/devicetree/bindings/mmc/mmc.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index ecc007a..b2046c6 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -49,6 +49,9 @@ Optional properties:
 - mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported
 - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
   programmed with. Valid range: [0 .. 0xffff].
+- no-sdio: skip sending sdio cmd during initialization
+- no-sd: skip sending sd cmd during initialization
+- no-mmc: skip sending mmc cmd during initialization
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
-- 
2.3.7