Re: [v3 PATCH 3/5] phy: Add USB Type-C PHY driver for rk3399

From: Guenter Roeck
Date: Thu Jun 23 2016 - 22:10:18 EST


Hi Chris,

On Thu, Jun 23, 2016 at 5:34 PM, Chris Zhong <zyw@xxxxxxxxxxxxxx> wrote:
> Hi Guenter
>
>
> On 06/24/2016 05:47 AM, Guenter Roeck wrote:
>>
>> Hi Chris,
>>
>> On Thu, Jun 23, 2016 at 5:51 AM, Chris Zhong <zyw@xxxxxxxxxxxxxx> wrote:
>>>
>>> Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
>>> Type-C PHY is designed to support the USB3 and DP applications. The
>>> PHY basically has two main components: USB3 and DisplyPort. USB3
>>> operates in SuperSpeed mode and the DP can operate at RBR, HBR and
>>> HBR2 data rates.
>>>
>>> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>>> Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
>>>
>> [ ... ]
>>
>>> +
>>> +static void tcphy_get_state(struct rockchip_typec_phy *tcphy,
>>> + struct extcon_dev *edev)
>>> +{
>>> + int mode;
>>> + bool plugged, flip, pin_assign, dfp, ufp, dp;
>>> +
>>> + ufp = extcon_get_cable_state_(edev, EXTCON_USB);
>>> + dfp = extcon_get_cable_state_(edev, EXTCON_USB_HOST);
>>> + dp = extcon_get_cable_state_(edev, EXTCON_DISP_DP);
>>> + flip = extcon_get_cable_state_(edev, EXTCON_TYPEC_POLARITY);
>>> + pin_assign = extcon_get_cable_state_(edev,
>>> EXTCON_TYPEC_PIN_ASSIGN);
>>> +
>>> + plugged = ufp | dfp | dp;
>>> + tcphy->flip = flip;
>>> +
>>> + if (plugged) {
>>> + if (ufp) {
>>> + mode = MODE_UFP_USB;
>>> + } else if (dfp && !dp) {
>>> + mode = MODE_DFP_USB;
>>> + } else if (dfp && dp) {
>>> + mode = MODE_DFP_USB | MODE_DFP_DP;
>>> + tcphy->pin_assign = pin_assign ? PIN_MAP_D :
>>> PIN_MAP_B;
>>> + } else {
>>> + mode = MODE_DFP_DP;
>>> + tcphy->pin_assign = pin_assign ? PIN_MAP_C :
>>> PIN_MAP_A;
>>
>> I am having trouble extracting pin_assign from our code. What
>> determines if map A or C should be selected ?
>>
>> Thanks,
>> Guenter
>
> Oh, forgot rename the macro:
>
> PIN_MAP_ should be PIN_ASSIGN_
>
>
> IF EXTCON_TYPEC_PIN_ASSIGN is attached, Type-C get
> Pin_Assignment_C(for DP only mode) or Pin_Assignment_D(for DP alt mode),
> if detached, it get the default Assignment: A(for DP only mode) or B(for
> DP alt mode),.
>

So we are really talking about DP only vs. DP Alt mode ? If so, do we
even need PIN_ASSIGN ? Why not just use EXTCON_DISP_DP_ALT directly ?

Also, I'll have to get a better understanding what "DP only mode" and
"DP Alt mode" actually means. DisplayPort is already a Type-C
alternate mode, so the terminology is a bit confusing. Do you happen
to have a description somewhere, by any chance ?

Thanks,
Guenter

> I am going to add a comment for describe which PIN_ASSIGN_ should be
> selected
> in next version, if no one disagrees the usage of cable
>
>
>>
>>
>
>