[PATCH 2/2] net: thunderx: Fix TL4 configuration for secondary Qsets

From: sunil . kovvuri
Date: Thu Jun 23 2016 - 01:55:27 EST


From: Sunil Goutham <sgoutham@xxxxxxxxxx>

TL4 calculation for a given SQ of secondary Qsets is incorrect
and goes out of bounds and also for some SQ's TL4 chosen will
transmit data via a different BGX interface and not same as
primary Qset's interface.

This patch fixes this issue.

Signed-off-by: Sunil Goutham <sgoutham@xxxxxxxxxx>
---
drivers/net/ethernet/cavium/thunder/nic_main.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 95f17f8..16ed203 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -499,6 +499,7 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic,
u32 rr_quantum;
u8 sq_idx = sq->sq_num;
u8 pqs_vnic;
+ int svf;

if (sq->sqs_mode)
pqs_vnic = nic->pqs_vf[vnic];
@@ -511,10 +512,19 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic,
/* 24 bytes for FCS, IPG and preamble */
rr_quantum = ((NIC_HW_MAX_FRS + 24) / 4);

- tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX);
+ if (!sq->sqs_mode) {
+ tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX);
+ } else {
+ for (svf = 0; svf < MAX_SQS_PER_VF; svf++) {
+ if (nic->vf_sqs[pqs_vnic][svf] == vnic)
+ break;
+ }
+ tl4 = (MAX_LMAC_PER_BGX * NIC_TL4_PER_LMAC);
+ tl4 += (lmac * NIC_TL4_PER_LMAC * MAX_SQS_PER_VF);
+ tl4 += (svf * NIC_TL4_PER_LMAC);
+ tl4 += (bgx * NIC_TL4_PER_BGX);
+ }
tl4 += sq_idx;
- if (sq->sqs_mode)
- tl4 += vnic * 8;

tl3 = tl4 / (NIC_MAX_TL4 / NIC_MAX_TL3);
nic_reg_write(nic, NIC_PF_QSET_0_127_SQ_0_7_CFG2 |
--
2.7.4