Re: [PATCH v11 08/14] usb: otg: add OTG/dual-role core

From: Peter Chen
Date: Tue Jun 21 2016 - 04:10:11 EST


On Tue, Jun 21, 2016 at 10:19:32AM +0300, Felipe Balbi wrote:
>
> Hi,
>
> Peter Chen <hzpeterchen@xxxxxxxxx> writes:
> >> >>> +
> >> >>> + /* start host */
> >> >>> + ret = hcd_ops->add(otg->primary_hcd.hcd,
> >> >>> + otg->primary_hcd.irqnum,
> >> >>> + otg->primary_hcd.irqflags);
> >> >>
> >> >> this is usb_add_hcd(), is it not? Why add an indirection?
> >> >
> >> > I've introduced the host and gadget ops interface to get around the
> >> > circular dependency issue we can't avoid.
> >> > otg needs to call host/gadget functions and host/gadget also needs to
> >> > call otg functions.
> >>
> >> IMO, this shows a fragility of your design. You're, now, lying to
> >> usb_hcd and usb_udc and making them register into a virtual layer that
> >> doesn't exist. And that layer will end up calling the real registration
> >> function when some magic event happens.
> >>
> >> This is only really needed for quirky devices like dwc3 (but see more on
> >> dwc3 below) where host and peripheral registers shadow each
> >> other. Otherwise we would be able to always keep hcd and udc always
> >> registered. They would get different interrupt statuses anyway and
> >> nothing would ever break.
> >>
> >> However, when it comes to dwc3, we already have all the code necessary
> >> to workaround this issue by destroying the XHCI pdev when OTG interrupt
> >> says we should be peripheral (and vice-versa). DWC3 also keeps track of
> >> the OTG states for those folks who really care about OTG (Hint: nobody
> >> has cared for the past 10 years, why would they do so now?) and we don't
> >> need a SW state machine when the HW handles that for us, right?
> >>
> >> As for chipidea, IIRC, that doesn't need a SW state machine either, but
> >> I know very little about that IP and don't even have documentation on
> >> it. My understanding, however, is that chipidea behaves kinda like MUSB,
> >> which changes roles automatically in HW based on ID pin state.
> >
> > Chipidea needs to set register for USB role manually.
>
> okay, so chipidea has private control of role. Much like dwc3. That's good.
>
> >> >>> + * @otg_dev: OTG controller device, if needs to be used with OTG core.
> >> >>
> >> >> do you really know of any platform which has a separate OTG controller?
> >> >>
> >> >
> >> > Andrew had pointed out in [1] that Tegra210 has separate blocks for OTG, host
> >> > and gadget.
> >> >
> >> > [1] http://article.gmane.org/gmane.linux.ports.tegra/22969
> >>
> >> that's not an OTG controller, it's just a mux. No different than Intel's
> >> mux for swapping between XHCI and peripheral-only DWC3.
> >>
> >> frankly, I would NEVER talk about OTG when type-C comes into play. They
> >> are two competing standards and, apparently, type-C is winning when it
> >> comes to role-swapping.
> >>
> >
> > In fact, OTG is mis-used by people. Currently, if the port is dual-role,
> > It will be considered as an OTG port.
>
> That's because "dual-role" is a non-standard OTG. Seen as people really
> didn't care about OTG, we (linux-usb folks) ended up naturally referring
> to "non-standard OTG" as "dual-role". Just to avoid confusion.

So, unless we use OTG FSM defined in OTG spec, we should not mention
"OTG" in Linux, right?

>
> > You are right, if the connector is type-c, it will be called as "type-c
> > port" by people :)
>
> oh no, that's not what I'm talking about. If you read Type-C and PD
> specs, they define their own method for data role swapping. USB OTG
> doesn't fit on top of a Type-C environment. It's not about what people
> will call it, it's really that OTG can't work on top of type-c. For
> starters, there's no ID pin ;-)

I know type-c, yes, there is no relationship between OTG and type-c.

--

Best Regards,
Peter Chen