[PATCH v3 02/15] phy: rockchip-emmc: configure frequency range and drive impedance

From: Douglas Anderson
Date: Mon Jun 20 2016 - 14:30:59 EST


From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>

Signal integrity analysis has suggested we set these values. Do this in
power_on(), so that they get reconfigured after suspend/resume.

Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
Changes in v3:
- Add Brian's PHY patches into my series

Changes in v2:
- Drop 170 MHz comment (only applicable to a subtly different Arasan PHY)

drivers/phy/phy-rockchip-emmc.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
index 48cbe691a889..f2f75cf69af1 100644
--- a/drivers/phy/phy-rockchip-emmc.c
+++ b/drivers/phy/phy-rockchip-emmc.c
@@ -56,6 +56,19 @@
#define PHYCTRL_DLLRDY_SHIFT 0x5
#define PHYCTRL_DLLRDY_DONE 0x1
#define PHYCTRL_DLLRDY_GOING 0x0
+#define PHYCTRL_FREQSEL_200M 0x0
+#define PHYCTRL_FREQSEL_50M 0x1
+#define PHYCTRL_FREQSEL_100M 0x2
+#define PHYCTRL_FREQSEL_150M 0x3
+#define PHYCTRL_FREQSEL_MASK 0x3
+#define PHYCTRL_FREQSEL_SHIFT 0xc
+#define PHYCTRL_DR_MASK 0x7
+#define PHYCTRL_DR_SHIFT 0x4
+#define PHYCTRL_DR_50OHM 0x0
+#define PHYCTRL_DR_33OHM 0x1
+#define PHYCTRL_DR_66OHM 0x2
+#define PHYCTRL_DR_100OHM 0x3
+#define PHYCTRL_DR_40OHM 0x4

struct rockchip_emmc_phy {
unsigned int reg_offset;
@@ -154,6 +167,20 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
int ret = 0;

+ /* DLL operation: 200 MHz */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+ HIWORD_UPDATE(PHYCTRL_FREQSEL_200M,
+ PHYCTRL_FREQSEL_MASK,
+ PHYCTRL_FREQSEL_SHIFT));
+
+ /* Drive impedance: 50 Ohm */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+ HIWORD_UPDATE(PHYCTRL_DR_50OHM,
+ PHYCTRL_DR_MASK,
+ PHYCTRL_DR_SHIFT));
+
/* Power up emmc phy analog blocks */
ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON);
if (ret)
--
2.8.0.rc3.226.g39d4020