[PATCH V2 42/63] clocksource/drivers/prima2: Convert init function to return error

From: Daniel Lezcano
Date: Thu Jun 16 2016 - 17:34:54 EST


The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly

or

- print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/clocksource/timer-prima2.c | 43 ++++++++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 11 deletions(-)

diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 2854c66..7b1084d 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -189,24 +189,36 @@ static void __init sirfsoc_clockevent_init(void)
}

/* initialize the kernel jiffy timer source */
-static void __init sirfsoc_prima2_timer_init(struct device_node *np)
+static int __init sirfsoc_prima2_timer_init(struct device_node *np)
{
unsigned long rate;
struct clk *clk;
+ int ret;

clk = of_clk_get(np, 0);
- BUG_ON(IS_ERR(clk));
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clock");
+ return PTR_ERR(clk);
+ }

- BUG_ON(clk_prepare_enable(clk));
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("Failed to enable clock");
+ return ret;
+ }

rate = clk_get_rate(clk);

- BUG_ON(rate < PRIMA2_CLOCK_FREQ);
- BUG_ON(rate % PRIMA2_CLOCK_FREQ);
+ if (rate < PRIMA2_CLOCK_FREQ || rate % PRIMA2_CLOCK_FREQ) {
+ pr_err("Invalid clock rate");
+ return -EINVAL;
+ }

sirfsoc_timer_base = of_iomap(np, 0);
- if (!sirfsoc_timer_base)
- panic("unable to map timer cpu registers\n");
+ if (!sirfsoc_timer_base) {
+ pr_err("unable to map timer cpu registers\n");
+ return -ENXIO;
+ }

sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);

@@ -216,14 +228,23 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);

- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
- PRIMA2_CLOCK_FREQ));
+ ret = clocksource_register_hz(&sirfsoc_clocksource, PRIMA2_CLOCK_FREQ);
+ if (ret) {
+ pr_err("Failed to register clocksource");
+ return ret;
+ }

sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);

- BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
+ ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+ if (ret) {
+ pr_err("Failed to setup irq");
+ return ret;
+ }

sirfsoc_clockevent_init();
+
+ return 0;
}
-CLOCKSOURCE_OF_DECLARE(sirfsoc_prima2_timer,
+CLOCKSOURCE_OF_DECLARE_RET(sirfsoc_prima2_timer,
"sirf,prima2-tick", sirfsoc_prima2_timer_init);
--
1.9.1