Re: [v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY

From: Rob Herring
Date: Tue Jun 14 2016 - 18:51:41 EST


On Mon, Jun 13, 2016 at 05:39:46PM +0800, Chris Zhong wrote:
> This patch adds a binding that describes the Rockchip USB Type-C PHY
> for rk3399
>
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v2:
> - add some registers description
>
> Changes in v1:
> - add extcon node description
> - move the registers in phy driver
> - remove the suffix of reset
>
> .../devicetree/bindings/phy/phy-rockchip-typec.txt | 77 ++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
> new file mode 100644
> index 0000000..430920c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
> @@ -0,0 +1,77 @@
> +* ROCKCHIP type-c PHY
> +---------------------
> +
> +Required properties:
> + - compatible : should be "rockchip,rk3399-typec-phy0" or
> + "rockchip,rk3399-typec-phy1"

Unless these blocks are different, these should be be same compat
string.

> + - reg: Address and length of the usb phy control register set
> + - rockchip,grf : phandle to the syscon managing the "general
> + register files"
> + - clocks : phandle + clock specifier for the phy clocks
> + - clock-names : string, clock name, must be "tcpdcore", "tcpdphy_ref";
> + - resets : a list of phandle + reset specifier pairs
> + - reset-names : string reset name, must be:
> + "tcphy", "tcphy_pipe", "uphy_tcphy"
> + - #phy-cells : Must be 0. See ./phy-bindings.txt for details.
> + - extcon : extcon specifier for the Power Delivery
> +
> +Note, there are 2 type-c phys for RK3399, and they are almost identical, except
> +these registers(description below), every register node contains 3 sections:
> +offset, enable bit, write mask bit.
> + - rockchip,typec_conn_dir : the register of type-c connector direction,

Don't use underscores in property names.

> + for type-c phy0, it must be <0xe580 0 16>;
> + for type-c phy1, it must be <0xe58c 0 16>;
> + - rockchip,usb3tousb2_en : the register of type-c force usb3 to usb2 enable
> + control.
> + for type-c phy0, it must be <0xe580 3 19>;
> + for type-c phy1, it must be <0xe58c 3 19>;
> + - rockchip,external_psm : the register of type-c phy external psm clock
> + selection.
> + for type-c phy0, it must be <0xe588 14 30>;
> + for type-c phy1, it must be <0xe594 14 30>;
> + - rockchip,pipe_status : the register of type-c phy pipe status.
> + for type-c phy0, it must be <0xe5c0 0 0>;
> + for type-c phy1, it must be <0xe5c0 16 16>;
> + - rockchip,uphy_dp_sel : the register of type-c phy selection for DP
> + for type-c phy0, it must be <0x6268 19 19>;
> + for type-c phy1, it must be <0x6268 3 19>;